Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for eXact PipeCut 360 HYDRA
Summary of Contents for eXact PipeCut 360 HYDRA
- Page 1 English Operating Instructions PipeCut 360 HYDRA These are the original instructions written in English language. All instructions are available on web-site: exacttools.com/manuals Patents: US 7,257,895, JP 4010941, EP 1301311, FI 108927, KR 10-0634113...
-
Page 2: Table Of Contents
Technical Data” is in conformity according to the technical provisions of the directive 2006/42/EC. For more information, please contact Exact Tools at the following address: The person authorized to compile the technical file: Marko Törrönen, R&D Manager, marko.torronen@exacttools.com Vantaa, 03.09.2024... -
Page 3: Technical Data
Package contents, please check that the package contains the following items: 1. Exact PipeCut 360 HYDRA 2. Operating instructions 3. 5 mm allen key 4. Open end wrench 5. Two hydraulic hoses + Exact Cermet 165 installed to the machine... -
Page 4: Safety
Do not discard the safety instructions; give them provided by occupational safety agencies. to the operator. The Exact PipeCut 360 HYDRA pipe saw is for Do not use the circular saw if it has been professional use only. damaged. -
Page 5: Projectile Hazards
NOISE HAZARDS • The PipeCut 360 HYDRA is designed to be used with a blade guard that must always be in place to • Loud noises can cause permanent hearing provide protection from shavings and other debris. -
Page 6: Vibration Hazards
Safety English handbook, to prevent an unnecessary increase in WORKPLACE HAZARDS noise levels. • Keep the work area clean and well lighted. • Select, maintain and replace the Cluttered benches and dark areas increase the risks consumable/inserted tool as recommended in the of electric shock, fire, and injury to persons. - Page 7 Safety English or fumes should be correctly used and maintained in sure that they do not pose a danger and cannot accordance with the manufacturer’s instructions. come into contact with sparks created by the • Select, maintain and replace the saw.
-
Page 8: Safety Information
Safety English Personal safety Safety information • WEAR APPROVED HEARING AND EYE PROTECTION DANGER: Failure to comply with these • WEAR APPROVED HAND PROTECTION operating instructions may result in serious injury or death. • WARNING: READ AND UNDERSTAND Make sure that the pipe being cut is correctly THE INSTRUCTION MANUAL PRIOR TO USE supported, and that each end of the pipe on both Stay alert. -
Page 9: Installation, Use And Maintenance: Precautionary Measures
• are physically able to handle the size, weight, CAUTION Only professional technicians and power of the device. may use and test the PipeCut 360 HYDRA pipe • are familiar with all relevant national, state- saw. specific, and local safety regulations, as well... -
Page 10: Intended Use
(1"), plastic 45 mm (1,8”). unintentionally. PipeCut 360 HYDRA pipe saw can be used to cut all e) Store the tool when it is idle out of reach of normal pipe materials, such as steel, stainless steel, children and other untrained persons. -
Page 11: Guarantee
2. the Exact PipeCut 360 HYDRA saw has not been misused. Environmental information 3. no attempt has been made by non- approved persons to repair the saw. -
Page 12: Operation
Operation English PICTURE A START button Measuring edge (25 mm / 1” from the blade) STOP button (oil flow shutoff switch) Gripper’s joints Locking pin Height adjustment screw Gripper adjustment knob and lock nut Blade screw Blade guard Pulling flange washer Locking pin hole Gripper’s wheels and ball bearings Attachment flange... -
Page 13: Operational Instructions
ATTACHMENT OF PIPE SAW TO PIPE Place the pipe saw above the pipe to be sawn, Exact PipeCut saws are designed with a gripper unit ensuring that the gripper encloses the pipe to be that ensures the saw’s secure attachment to the sawn. - Page 14 Operation English...
-
Page 15: Height Adjustment
HEIGHT ADJUSTMENT the feeding motion and you can also slightly brake the feeding speed. The Exact 360 HYDRA has a blade depth adjustment mechanism. This allows to optimize the Step 3. When the pipe saw is under the pipe, height of the blade. Usually the blade lifetime... - Page 16 Operation English SAWING ALIGNMENT ADJUSTMENT Open the adjustment screws 1 and 2 and turn the tool into the adjustment pointer as shown in the picture below. If you need sawing to go more to the left, turn the adjustment pointer the right. Tighten the two screws after adjustment.
-
Page 17: Changing Blades
(Picture C /C6) is securely in place and that blades are high quality and have been designed there are no shavings, debris, sand or other specifically for the Exact PipeCut 360 HYDRA pipe functionally detrimental materials between the blade saw. -
Page 18: Theoretical Cutting Depths
42.3/1.70 34.8/1.37 350/14 45.0/1.80 37.5/1.47 THE EXACT PIPECUT 360 HYDRA MACHINE CUTS ALL KNOWN PIPE GRADES AND WITH THE FOLLOWING BLADES: • Exact Diamond X165 and X180 Discs, for cutting cast iron only. • Exact ALU 165 and 180, aluminum and all kinds of plastics. - Page 19 English...
- Page 20 English...
Need help?
Do you have a question about the PipeCut 360 HYDRA and is the answer not in the manual?
Questions and answers