1. Manuals
  2. Brands
  3. eXact Manuals
  4. Industrial Equipment
  5. PipeCut 360 System
  6. User manual

eXact PipeCut 360 System User Manual

Hide thumbs Also See for PipeCut 360 System:
Table of Contents

Advertisement

Quick Links

Download this manual
Information
Exact PipeCut 360 System
Users manual
Guarantee of conformity with EU
requirements
We Exact Tools Oy, Mechelininkatu 15, 00100 Helsinki, Finland, guarantee
that the Exact PipeCut 360 Serial numbers 00000-99999 to which this
statement refers fulfills the basic health and safety requirements mentioned
in the (machine directive) EU directive 98/37/EY. Also the Exact PipeCut
360 fulfills the requirements of standard EN 60745-1:2003 + A1:2003
safety of hand-held electric motor operated tools and the applicable
parts of standard EN 60745-2-5 particular requirements for circular saws
and circular knives.
Also the Exact PipeCut 360 complies with the essential protection
requirements of the Council Directive 89/336/EEC as stated in the Article
4 and the tested product is in compliance with the following Product
Family standards: EN 55014-1 (2000), EN 55014-2 (1997), EN 61000-
3-3 (1995) + Am. A1 (2001)
Helsinki 30.06.2006
Seppo Makkonen
Managing Director
1
e n g l i s h
e n g l i s h

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PipeCut 360 System and is the answer not in the manual?

Questions and answers

Related Manuals for eXact PipeCut 360 System

Summary of Contents for eXact PipeCut 360 System

  • Page 1 We Exact Tools Oy, Mechelininkatu 15, 00100 Helsinki, Finland, guarantee that the Exact PipeCut 360 Serial numbers 00000-99999 to which this statement refers fulfills the basic health and safety requirements mentioned in the (machine directive) EU directive 98/37/EY. Also the Exact PipeCut...

  • Page 2: Table Of Contents

    Attaching the pipe saw to the pipe Piercing the pipe wall Sawing around a pipe Overload protection Straightness of cut and adjusting wheel Exact Tools Oy Mechelininkatu 6 Installing and changing the saw blade 00100 HELSINKI Service and maintenance instructions...

  • Page 3: Foreword

    EN 60745-2-5 exclusive of the requirement which relates to the opening of the blade guards. (The Exact PipeCut 360 pipe saws use is made easier by being able to open the blade guard without tools). Also the Exact PipeCut 360 complies with the essential protection requirements of the Council...

  • Page 4: Package Contents

    Foreword Exact PipeCut 360 pipecutting system, Package contents: Please check the package contains the following items: Pipesaw case Exact PipeCut 360 pipe saw Hard-metal blade 140 x 62 / Z 46 (fitted on the machine) Cutting holder and supporting holders x2 Hex socket key 2x (5 mm &...

  • Page 5: Safety

    Safety it cannot close in on the sawn gap and clamp onto Safety Instructions the blade. The machine works at its best and safest when it is used the way for which it was designed. In order to prevent, electrical shocks, injuries, Dress suitably and the risk of fire the following basic safety Do not use clothing that is too loose or jewellery...

  • Page 6: Use And Limitations

    The Exact PipeCut 360 pipe saw is intended for use as a pipe fitter’s tool at the installation site. The Exact Be alert PipeCut 200 pipe saw can only be used to cut round Concentrate on your work.

  • Page 7: Operation

    Operation Fig. A 1.UNLOCK button 2.Power switch 3.Power-switch locking lever 4.Blade-guard cover 5.Blade-guard finger screw 6.Moving blade-guard 7.Edge of moving blade-guard 8.Adjusting wheel 9.Operating handle 10.Spindle-lock button 11.Blade-guard finger screw 12.Motor unit 13.Overload protection 14. Rating plate 15.Gripper unit 16.Gripper adjustment handle 17.

  • Page 8: Operating Instructions

    Operation Fig C Exact PipeCut 200 pipecutting system operating instructions Before operating the tool Ensure that the motor unit is in the upright position. The yellow mark of the UNLOCK button is visible. Check that the blade is correctly fitted, in good condition and suitable for the material to be cut.

  • Page 9: Attaching The Pipe Saw To The Pipe

    Operation Fig E Attaching the pipe saw to the pipe Open the pipe saw's gripper unit enough to suit the diameter of the pipe by rotating the adjustment handle located at the rear of the saw (Fig. E/1). Position the pipe saw on top of the pipe so that the edge of the lower blade guard is at the cutting mark.

  • Page 10: Overload Protection

    Operation Select the sawing speed as per the material and the Fig J thickness of the wall. Too high speed can damage the blade, overload the pipe saw and give a poor sawing result. When the pipe is cut off, push the UNLOCK button forward until the yellow mark is visible and the locking is released (Fig L/1).

  • Page 11: Installing And Changing The Saw Blade

    Operation, maintenance The wheel can be adjusted in 9 positions; mid position and 4 steps to left and right. To adjust the wheel, loosen the locking screw (Fig N/1) and turn the Fig N wheel center clockwise or counterclockwise to the desired position (Fig N/2), and lock the wheel again (Fig N/3).
  • Page 12 Guarantee worm screws on it (Fig. P/4). Blade guard If the Exact PipeCut 200 pipe saw becomes unusable When you have sawn plastic pipes and then intend due to material or manufacturing faults within 24 to start sawing metal pipes always clean the inside months of the date of purchase, we will replace the of the blade guards.

Table of Contents