KTM 250 SX-F 2005 Repair Manual page 79

2
1
3
7
5
Mounting the clutch
– Slide the inner ring
NOTE: Turn the starter idler
back and forth until the toothing engages.
4
– Slide on the stop disk and driver.
– Apply Loctite 243 to the driving nut
– Hold the driver with special tool 503.29.003.000 and tighten the
– Turn down the lock washer the driving nut.
– Insert the pressure piece
– Thoroughly oil all lining disks.
– Starting with lining disk
6
, needle bearing
1
the main shaft.
3
washer .
6
driving nut to 120 Nm (A/F 27).
7
, insert all 8 lining disks and all 7 clutch
8
disks in the outer clutch hub, ending with a lining disk on top.
9
2
8
1
and outer clutch hub on
2
, oil pump gear and outer clutch hub
4
and mount with a new lock
5
.
9
6-8