KTM 250 SX-F 2005 Repair Manual page 32

3-9
1
– Mount the foot brake cylinder
and tighten to 10 Nm.
– Apply Loctite 243 to the ball joint of the pushrod and tighten to 10
Nm.
– Attach the return spring for the foot brake lever.
– Mount the chain and chain joint.
!
W
HEN YOU MOUNT THE CHAIN JOINT
POINTS IN THE RUNNING DIRECTION
– To adjust the chain tensioning: see Owner's Manual.
– Mount both sides of the frame protector.
– To fill and bleed the cooling system: see Chapter 2
– Mount the seat and tank with the spoiler and take the motorcycle off
the assembly stand.
, apply Loctite 243 to the screws
1
CAUTION !
,
MAKE SURE THE CLOSED SIDE OF THE GUIDE
.