KTM 250 SX-F 2005 Repair Manual page 31

1
1
5
– Connect the radiator hoses to the engine and tighten the hose clamp
1
– Attach the manifold pipe to the front of the motorcycle and slide
into the main silencer.
– Mount the fixing screw
the rubber sleeve
2
– Attach the exhaust springs
5
– Position the rear wheel with the swing arm and shock absorber in
the frame.
6
– Insert the swing arm pivot and tighten the nut.
– Tighten the upper shock absorber screw
– Tighten the nut on the swing arm pivot to 100 Nm.
– Tighten the nuts on the two engine braces to 33 Nm.
– Tighten the front and lower engine fixing screws to 60 Nm.
for the manifold pipe with washers
2
.
4
2 3
4
3
.
5
to 70 Nm.
6
3-8
.
1
and
3