Drill Master 97626 Owner's Manual & Safety Instructions page 10

Accessories
Note: Refer to "Parts List and
Diagram" on page 14 for
accessory illustrations.
• Use the Diamond Burr
Bits (4) to drill hard, brittle
materials, such as tile.
• Use the Mounted Stones (5)
for sharpening cutting tools,
screwdrivers etc, deburring metal
after cutting, and removing excess
material on metal and ceramics.
• Use the Sanding Drums (6)
to smooth out rough areas
on soft materials.
• Use the Cut-off Wheels (7)
for cutting, carving and
slotting materials.
For technical questions, please call 1-888-866-5797.
Page 10
• Use the Buffing Wheels (8)
for polishing.
• Use the Wire Wheels (9) to
clean dirty or rusted surfaces.
• Use the Whet Stone (10)
for sharpening.
• Use the Drill Bits (11) to
bore small holes.
• Mandrels are the shanks
with a threaded or screw
head. Use them with the
cut-off wheels, polishing
wheels, and sanding discs.
The shank without threads on the
end is for the felt polishing wheels.
Item 97626