Power Tool Use And Care - Drill Master 97626 Owner's Manual & Safety Instructions

power tool use and care

1. Do not force the power
tool. Use the correct power
tool for your application.
The correct power tool will do
the job better and safer at the
rate for which it was designed.
2. Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
3. Disconnect the plug from
the power source before
making any adjustments,
changing accessories,
or storing power tools.
Such preventive safety measures
reduce the risk of starting the
power tool accidentally.
4. Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool.
Power tools are dangerous in
the hands of untrained users.
Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
For technical questions, please call 1-888-866-5797.
Item 97626
5. Maintain power tools. check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power tool's
operation. If damaged, have
the power tool repaired before
use. Many accidents are caused
by poorly maintained power tools.
6. Keep cutting tools sharp and
clean. Properly maintained
cutting tools with sharp cutting
edges are less likely to bind
and are easier to control.
7. Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working
conditions and the work to be
performed. Use of the power
tool for operations different from
those intended could result
in a hazardous situation.
Page 5