Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2014 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15c
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Drill Master 62405
Summary of Contents for Drill Master 62405
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 62405... -
Page 3: Electrical Safety
A wrench or a key left attached to a moving part of the power tool may result in personal injury. Item 62405 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Power Tool Use And Care
Moving parts can grab the grounded. Ground Fault Circuit Interrupter surface and pull the tool out of your control. (GFCI) should also be implemented – it prevents sustained electrical shock. Page 4 For technical questions, please call 1-888-866-5797. Item 62405... -
Page 5: Vibration Safety
If any abnormal seek medical advice as soon as possible. vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. Item 62405 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Page 6 For technical questions, please call 1-888-866-5797. Item 62405...
-
Page 7: Extension Cords
Do not cover ventilation ducts. Keep flammable objects away. n 0 xxxx/min. No Load Revolutions per Minute (RPM) WARNING marking concerning Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 62405 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Specifications
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 14. Functions Trigger Lock ON Button Hex Key Blade Clamp Assembly Dust Port Baseplate Figure A Page 8 For technical questions, please call 1-888-866-5797. Item 62405... -
Page 9: Operation
2. Pull the Baseplate out and tilt it to the desired angle between 0° and 45° to the right or left. 3. Tighten the Screws to secure the Baseplate in place. Screws Figure C Item 62405 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Work Piece And Work Area Set Up
The power cord must reach the work area with enough extra length to allow free movement while working. Page 10 For technical questions, please call 1-888-866-5797. Item 62405... -
Page 11: General Operating Instructions
6. Allow the Saw Blade to reach full speed then from its electrical outlet. Clean, then store rest the Baseplate on the workpiece and the tool indoors out of children’s reach. guide the Saw Blade into the workpiece. Item 62405 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Maintenance
Do not immerse the Jigsaw in liquid. WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician. Page 12 For technical questions, please call 1-888-866-5797. Item 62405... -
Page 13: Troubleshooting
3. Laser damaged. 3. Have a qualified service technician check the tool for internal damage. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 62405 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 62405... - Page 15 Assembly Diagram Item 62405 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 62405 and is the answer not in the manual?
Questions and answers
Where can you purchase parts