Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the
manual near the assembly diagram (or month and year of purchase if product has no number). Keep this
manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
REV 14i
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2008 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using
this product. Failure to do so
can result in serious injury.
SAVE THIS MANUAL.
Advertisement
Table of Contents
Related Manuals for Drill Master 97626
Summary of Contents for Drill Master 97626
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. For technical questions, please call 1-888-866-5797. Page 2 Item 97626... -
Page 3: General Power Tool Safety Warnings
Water entering a power tool will use a Ground Fault circuit Interrupter (GFcI) protected increase the risk of electric shock. supply. Use of a GFCI reduces the risk of electric shock. For technical questions, please call 1-888-866-5797. Item 97626 Page 3... -
Page 4: Personal Safety
4. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. For technical questions, please call 1-888-866-5797. Page 4 Item 97626... -
Page 5: Power Tool Use And Care
Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. For technical questions, please call 1-888-866-5797. Item 97626 Page 5... - Page 6 • Lead from lead-based paints built into this product, but must • Crystalline silica from bricks and be supplied by the operator. cement or other masonry products For technical questions, please call 1-888-866-5797. Page 6 Item 97626...
-
Page 7: Vibration Safety
Disease should not use this tool. Let the tool do the work. 7. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. SAVE THESE INSTRUcTIONS. For technical questions, please call 1-888-866-5797. Item 97626 Page 7... -
Page 8: Extension Cords
Do not cover Amperes ventilation ducts. WARNING marking No Load Revolutions x x x x / concerning Risk of per Minute (RPM) m i n . Electric Shock. Maintain Power cord properly. For technical questions, please call 1-888-866-5797. Page 8 Item 97626... -
Page 9: Specifications
INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Functions 1/8″ Shank with power Switch Buffing Wheel collar Lock Button For technical questions, please call 1-888-866-5797. Item 97626 Page 9... - Page 10 The shank without threads on the • Use the Cut-off Wheels (7) end is for the felt polishing wheels. for cutting, carving and slotting materials. For technical questions, please call 1-888-866-5797. Page 10 Item 97626...
-
Page 11: Operation
The power cord must reach the work area with enough extra length to allow free movement while working. For technical questions, please call 1-888-866-5797. Item 97626 Page 11... -
Page 12: General Operating Instructions
Rotary Tool to come up to the tool and disconnect its full speed before beginning work. power supply after use. Clean, then store the tool indoors out of children’s reach. For technical questions, please call 1-888-866-5797. Page 12 Item 97626... -
Page 13: Maintenance
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. For technical questions, please call 1-888-866-5797. Item 97626 Page 13... -
Page 14: Parts List And Diagram
Note: If product has no serial Note: Some parts are listed and number, record month and shown for illustration purposes year of purchase instead. only, and are not available individually as replacement parts. For technical questions, please call 1-888-866-5797. Page 14 Item 97626... -
Page 15: Assembly Diagram
Assembly Diagram For technical questions, please call 1-888-866-5797. Item 97626 Page 15... -
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.