Connecting Cables - Asus Vintage V2-AH2 Manual

2.8

Connecting cables

You may have disconnected some cables when you installed system
components. Connect these cables before you replace the chassis cover.
Front panel buttons and LEDs
Connect the reset button, power switch, power LED, and HDD LED
cables to their respective leads in the system panel connector on the
motherboard. See page 4-11 for the system panel descriptions.
Reset button
HDD LED
Power LED
Power Switch
System Panel Connector
*The extra 2-pin power LED is for other Vintage V2 models.
2-18
R
SPEAKER
PLED
PA NE L
HD_LED
PWRSW
Requires an ATX power supply .
*
Chapter 2: Basic installation
Power LED*
RESET