Hardware Monitor - Asus Vintage V2-AH2 Manual

Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When
this item is set to Enabled, the items Date (of Month) and Resume Time
(hh:mm:ss) become configurable with set values.
Configuration options: [Disabled] [Enabled]
Power Up By PS/2 Mouse [Disabled]
Allows you to disable or enable the Power Up by PS/2 Mouse function.
Configuration options: [Disabled] [Enabled]
Power Up By PS/2 Keyboard [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 keyboard
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
5.5.4

Hardware Monitor

The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. Select an item then press <Enter> to
display the configuration options.
Q-Fan Controller
Vcore Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature
M/B Temperature
CPU Fan speed
Chassis Fan1 speed
Chassis Fan2 speed
Fan Type Select
Start Up Temperature(ºC)
Start Up PWM
Fan2 Start Up PWM
Slope PWM
CPU Fan Speed warning
F1:Help
ESC: Exit
5-30
Phoenix-Award BIOS CMOS Setup Utility
Power
Hardware Monitor
↑↓ : Select Item
→←: Select Menu
[Enabled]
[ 1.64V]
[ 3.24V]
[ 5.21V]
[ 11.71V]
57ºC
35ºC
4265 RPM
0 RPM
0 RPM
[3 Pin Fan]
[53]
[70]
[48]
[4 PWM/ºC]
[Disabled]
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Press [Enter] to set.
F5: Setup Defaults
F10: Save and Exit
Chapter 5: BIOS setup