Asus Vintage V2-AH2 Manual page 59

R
IDE Connectors
3. Serial ATA connectors (7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA
hard disk drives.
R
SATA Connectors
Important notes on Serial ATA
• You must install Windows
Service Pack1 before using Serial ATA hard disk drives.
• When using the connectors in standard IDE mode, connect the primary
(boot) hard disk drive to the SATA1 or SATA2 connector.
ASUS Vintage V2-AH2
SATA3 SATA4
GND GND
RSA TA _TXP3 RSA TA _TXP4
RSA TA _TXN3 RSA TA _TXN4
GND GND
RSA TA _RXP3 RSA TA _RXP4
RSA TA _RXN3 RSA TA _RXN4
GND GND
1
SA TA
SA TA
GND GND
RSA TA _TXP1 RSA TA _TXP2
RSA TA _TXN1 RSA TA _TXN2
GND GND
RSA TA _RXP1 RSA TA _RXP2
RSA TA _RXN1 RSA TA _RXN2
GND GND
2000 Service Pack 4 or the Windows
®
NOTE: Orient the red markings
(usually zigzag) on the ID
ribbon cable to PIN 1.
2
XP
®
4-7