2.10 Re-Connecting Cables; Led Cables - Asus V2-PH1 Manual

2.10 Re-connecting cables

You may have disconnected some cables when you were installing
components. You must re-connect these cables before you replace the
chassis cover.

LED cables

Reset button
IDE LED
Power Switch
Power LED
System panel connector
Connect the reset button, power switch, power LED, and HDD
LED cables to their respective leads in the system panel connector on the
motherboard.
ASUS Vintage2-PH1
Power LED
F_PANEL
PWRSW
GND
PWR
PWR_LED-
PWRLED
PWR_LED+
Requires an ATX power supply.
*
RESET
Reset
Ground
IDE_LED-
IDE LED
IDE_LED+
2-19