Cpu Temperature - Asus Vintage V2-AH2 Manual

Q-Fan Controller [Enabled]
Allows you to enable or disable the Q-Fan controller.
Configuration options: [Disabled] [Enabled]
VCORE Voltage, 12V Voltage, 3.3V Voltage, 5V
Voltage[xx.xºC] or [Ignored]
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators. Select [Ignored] if you do not
want to display the detected temperatures.

CPU Temperature

M/B Temperature
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. These items are not user-configurable
CPU Fan Speed
Chassis Fan Speed
The onboard hardware monitor automatically detects and displays the
Chassis, CPU, and Power fan speeds in rotations per minute (RPM). If the
fan is not connected to the motherboard, the field shows 0. These items
are not user-configurable.
Fan Type Select [3 Pin Fan]
Allows you to select the fan type.
Configuration options: [3 Pin Fan] [4 Pin Fan]
Start Up Temperature (ºC) [53]
Allows you to enter a DEC number from 0 to 100. The fan starts up when
CPU temperature is over this value.
Start Up PWM [48]
Allows you to set PWM value from 0 to 127 when fan starts up.
Start Up PWM [48]
Allows you to set PWM value from 48 to 127 when fan2 starts up.
Slope PWM [4 PWM/ºC]
Sets PWM increase value when the temperature rises one degree.
Configuration options: [0 PWM/ ºC] [1 PWM/ ºC] [2 PWM/ ºC]... [14
PWM/ ºC] [15 PWM/ ºC]
CPU Fan Speed warning
Allows you to disable the CPU Fan Speed warning function, or select a CPU
fan speed when the system send outs a warning message.
Configuration options: [Disabled] [800 RPM] [1200 RPM] [1600 RPM]
ASUS Vintage V2-AH2 5-31