Bluetooth Module Configuration - Topcon GR-3 Operator's Manual

Bluetooth Module
Configuration
Use BTCONF, Topcon's Bluetooth module's configuration program,
and the computer to:
• access the Bluetooth wireless technology module
• configure the Bluetooth module
• check or change the module's configuration
To access the Bluetooth wireless technology module, first download
and install BTCONF, then connect the computer and the receiver and
run the configuration program. See "Installing BTCONF" on page 2-
5 for details.
Once BTCONF is available, follow these steps to configure the
Bluetooth module.
1. Using the RS232 cable, connect the serial port of the computer
(usually COM1) to the receiver's serial port. If needed, turn on
the receiver and computer.
2. Run the Bluetooth module configuration program (Figure 2-19).
For BTCONF version and copyright information, click the About
button.
Figure 2-19. Bluetooth Module Configuration Main Screen
P/N 7010-0736

Bluetooth Module Configuration

2-23