Toshiba MMK-AP0072H Service Manual page 29

No. Item
18 MEMORY operation
19 PRESET operation
Outline of specifications
Start the air conditioner in the operation mode
which you want the remote control to memorize.
(1) Press this button briefly to standby memorizing
the setting.
All the icons currently displayed except for the
clock display and mark flashes.
(2) Press and hold the MEMO button for more than
3 seconds while the display flashes.
The mark is indicated and the setting is memo-
rized.
• If you do not press the MEMO button within 3
seconds or if you press another button, the
MEMORY setting is cancelled.
• Operation modes which can be memorized
with the MEMO button are MODE, Tempera-
ture, FAN, TIMER and Hi POWER.
To operate the air conditioner with the setting
memorized by the MEMO button.
(1) Press the PRESET button. The setting memo-
rized with the MEMO button will be indicated
and the air conditioner operates with regards to
the setting.
• The lamp (green) on the display panel of the
indoor unit goes on, and operation starts after
approximately 3 minutes.
• Initial setting:
MODE
Temperature : 22
: AUTO
29
FILE NO. SVM-05052
Remarks
PRESET
START/STOP
FAN MODE AUTO
(1)
ECO Hi-POWER
SWING
(2)
TIMER
FIX MEMO
ON OFF SET
FILTER
RESET CLOCK CHECK
PRESET
(1)
START/STOP
FAN MODE
SWING ECO Hi-POWER
TIMER
FIX MEMO
ON OFF SET
FILTER
RESET CLOCK CHECK
CLR
AUTO
CLR