Toshiba MMK-AP0072H Service Manual page 12

Operation section
Push each button to select a desired operation.
• The details of the operation needs to be set up once, afterward, the air conditioner can be used by pushing
button only.
2
3
4
5
1
Air volume select button
Selects the desired air volume mode.
2
Timer set button
TIMER SET button is used when the timer is set
up.
3
Check button
The CHECK button is used for the check opera-
tion. During normal operation, do not use this
button.
4
Fan button
FAN button is used when a fan which is sold on
the market or etc. is connected.
• If "No function" is displayed on the remote
controller when pushing the FAN button, a fan
is not connected.
5
Filter reset button
Resets (Erases) "FILTER
6
UNIT and AUTO flap button
Select a unit No.
UNIT
Automatic swing or adjust flap angle
7
Operation lamp
Lamp is lit during the operation. Lamp is off
when stopped.
Although it flashes when operating the protection
device or abnormal time.
1
7
UNIT
SET CL
6
" display.
12
8
button
When the button is pushed, the operation
starts, and it stops by pushing the button
again.
When the operation has stopped, the opera-
tion lamp and all the displays disappear.
9
Operation select button
Selects desired operation mode.
10
Set up temperature button
Adjusts the room temperature.
Set the desired set temperature by pushing
or
OPTION :
Remote controller sensor
Usually the TEMP . sensor of the indoor unit senses
the temperature. The temperature on the surround-
ing of the remote controller can also be sensed.
For details, contact the dealer from which you have
purchased the air conditioner.
FILE NO. SVM-05052
8
9
10
.