Toshiba MMK-AP0072H Service Manual page 114

No. Part name
S
PMV motor <Caution in works>
Use spanners to remove PMV motor.
As the pipes are deformed, do not use
monkey spanners. When there is 100 to the
ceiling, use a spanner below mm.)
1) Perform work of item
2) Take off fixing screws (2 pcs) of PMV
3) Remove connector (6P , Blue) for PMV
4) Take off bundling band of PMV motor
5) Using a spanner, remove PMV motor.
<Caution in reassembling>
Draw out lead wires of PMV motor from
positions same to original positions before
removing.
T
Horizontal 1) Remove shaft of the horizontal grille
grille
Procedure
Q
.
cover, and then remove PMV cover.
motor from the electric parts box.
lead wires.
from the rear plate.
(First remove the left shaft, and then
remove the other shafts while sliding the
horizontal grille leftward.)
Screw at PMV main unit side
(14mm spanner)
Bind band
Ground lead wire
114
FILE NO. SVM-05052
Remarks
Screw at PMV motor side
(19mm spanner)
P.M.V. lead wire