ITS Telecom CGW-T Installation And Programming Manual page 32

Operation
End Dialing Digit
Define "#" as the digit
that indicates the end of a
dialed number, causing
the unit to immediately
start dialing.
(GSM only)
Pulse drop
Activate the pulse drop
feature by defining time
for loop disconnect for
conversation end state
signaling to PBX.
26
Command
*370 + X
where:
X = 0 End dialing digit
disabled
X = 1 End dialing digit
enabled
("#" indicates end of number)
*380 + XX
where:
XX = time in tenth of seconds.
For example:
X = 10=1000 milliseconds = 1
second
X = 01 = 100 milliseconds
Legal values: 00-99
Note: If this feature is activated
together with reverse polarity
(*320) "Pulse drop" occurs
after polarity is reversed.
CGW-T/TS/D Installation and Programming Manual
Default
1
00 (feature disabled)