Table of Contents
Advertisement
Receiving a Call
When a new call is received the phone will ring and the visual ring
indicator will flash. If you have a voice message: New voice mail
will be show on the LCD.
1. To answer a call, lift the handset and speak.
2. Adjust your volume & tone settings if needed (see page 12).
3. To end the call, replace the handset on the base.
Note:
If you want to delete the new voice mail, press the
standby mode, then press and hold the
Muting the Microphone
During a conversation, you can temporarily switch your phone's
microphone off, so that the other party cannot hear you.
To mute your microphone, press the Mute soft key during the
conversation. The "Mute" appears on the LCD.
To unmute your microphone, press the Unmute soft key. You will
restore the normal condition.
Using the Amplification Function
Your phone is equipped with a specialized amplification function
designed to fit your needs. During a conversation you can adjust
the controls on the front panel of the phone (see diagram 3) and
use the AMPLI key. Adjust the VOLUME control and TONE
control to fit the levels to your hearing requirements. The volume
will be set to middle at the factory.
When you press the AMPLI key, the handset receiver volume
adjustment is 15-30dB. The TONE control allows you to either
boost low or high frequency range. If you press the AMPLI key
SETTINGS
13
p
key in
key.
Advertisement
Table of Contents
