Fujitsu STYLISTIC Q507 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Tablet
  5. STYLISTIC Q507
  6. Operating manual

Fujitsu STYLISTIC Q507 Operating Manual

Hide thumbs Also See for STYLISTIC Q507:
Table of Contents

Advertisement

Quick Links

See also: User Manual
System
Operating Manual
FUJITSU Tablet STYLISTIC Q507

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu STYLISTIC Q507

Summary of Contents for Fujitsu STYLISTIC Q507

  • Page 1 System Operating Manual FUJITSU Tablet STYLISTIC Q507...
  • Page 2 Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000 "http://solutions.us.fujitsu.com" "http://solutions.us.fujitsu.com/contact" Have a question? Email us at: "AskFujitsu@us.fujitsu.com" Copyright © 2017 Fujitsu America, Inc.. All rights reserved FPC65-7795-02...
  • Page 3 FUJITSU Tablet STYLISTIC Q507 Operating Manual Declarations of conformity Fujitsu Contact Information Notational conventions Ports and controls Important notes First-time setup of your device Working with the Tablet PC Accessories for your Tablet PC (optional) Security functions Connecting external devices...
  • Page 4 Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document.

  • Page 5: Table Of Contents

    Fujitsu Contact Information ........
  • Page 6 Discard Changes - Discard Changes without exiting BIOS Setup Utility ....66 Save Changes - save changes without exiting the BIOS Setup Utility ....66 Fujitsu...
  • Page 7 Wireless LAN Modes Using this Device ..........89 Fujitsu...
  • Page 8 Index ................. . 100 Fujitsu...

  • Page 9: Declarations Of Conformity

    Telephone: (408) 746-6000 Declares that product: Base Model Configuration: STYLISTIC Q507 Tablet PC Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

  • Page 10: Fujitsu Contact Information

    Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities and applications to determine whether you have the latest versions. If you have a Windows operating system, you will need to go to the Support Site to download the FSDM Utility: "http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".

  • Page 11: Notational Conventions

    Cross-references to another section, e.g. "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://solutions.us.fujitsu.com/" • names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...

  • Page 12: Ports And Controls

    2 = Front webcam 8 = Docking port 3 = Ambient light sensor 9 = Center alignment point 4 = Webcam status LED (blue) 10 = Battery charging indicator (orange) 5 = Power-on indicator (white) 6 = Speakers (internal, not visible) Fujitsu...
  • Page 13 4 = microHDMI port (protected by cover) Right side 1 = USB 2.0 port (protected by cover) 5 = ON/OFF button 2 = Shortcut button 6 = Stylus garage 3 = Volume down button 7 = Tether eyelet 4 = Volume up button Fujitsu...
  • Page 14 Ports and controls Rear 1 = Screw holes for mounting accessories 4 = Webcam flash (device dependent) 5 = Dual microphones 2 = Webcam status LED 3 = Rear webcam Fujitsu...

  • Page 15: Important Notes

    In the event you drop your tablet PC or damage the housing in any way, immediately turn off power and disconnect the power plug. Failure to do so could result in a short circuit, smoke, and/or fire. Contact Fujitsu Service and Support to learn how to get the computer repaired.

  • Page 16: Additional Safety Notes For Devices With Wireless Components

    The energy efficiency is increased and environmental pollution is reduced. You save money and help protect the environment. Energy saving under Windows ► Make use of the available energy-saving functions as described in chapter "Using the power-saving functions", Page Fujitsu...

  • Page 17: Traveling With Your Tablet Pc

    Russia and the Commonwealth of Independent States (CIS), much of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, much of south-east Asia United Kingdom, Ireland, Malaya, Singapore, parts of Africa China, Australia, New Zealand Fujitsu...

  • Page 18: Transporting The Tablet Pc

    ► Unplug the AC plug of the AC adapter and all external devices from the power outlets. ► Disconnect the AC adapter cable and the data cables for all external devices. ► To protect against damaging jolts and bumps, use a suitable Tablet PC carrying case to transport your Tablet PC. Fujitsu...

  • Page 19: Cleaning The Tablet Pc

    If the Tablet PC is exposed to water or other liquids, liquid can penetrate the Tablet PC and cause a malfunction. Do not continue to use the Tablet PC. Switch it off and contact our hotline / service desk (see enclosed list of service desks or visit our website at:."http://www.fujitsu.com/us/support/"). Fujitsu...

  • Page 20: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need to reuse the packaging in the future, for example if you need to ship your device. Fujitsu...

  • Page 21: Choose A Location

    ► Connect the AC cable (1) to the AC adapter. ► Plug the AC cable (2) into a power outlet. ► Connect the AC adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...

  • Page 22: Switching On The Device For The First Time

    Press the ON/OFF button (2) for about one second to switch the device on. The power-on indicator (1) lights up whenever the system is switched on. ► During the installation process, follow the on-screen instructions. You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com". Fujitsu...

  • Page 23: Installing Bonus Apps

    ► Double-click on the shortcut Fujitsu BonusApps. ► In the dialog box User Account Control by clicking Yes confirm you wish to enter Fujitsu Bonus Apps. ► Select the applications you wish to install by selecting the checkbox adjacent to your selection.

  • Page 24: Working With The Tablet Pc

    This chapter describes the basics for operating your Tablet PC. You can find instructions on how to connect external devices (e.g. mouse, flash storage) to the Tablet PC in the chapter "Connecting external devices", Page Please refer to the notes in the chapter "Important notes", Page Fujitsu...

  • Page 25: Status Indicators

    The indicator is not lit up: The webcam is switched off. Power-on indicator • The indicator lights up white: The Tablet PC is switched on or in sleep mode. • The indicator is not lit up: The Tablet PC is switched off. Fujitsu...

  • Page 26: Switching The Tablet Pc On

    Panel -) Power Options -Choose what the ON/OFF button does If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page Fujitsu...

  • Page 27: Switching The Tablet Pc Off

    Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish, Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian. On Windows you can set the required language under Control Panel – Time, Language and Region – Language.. Fujitsu...

  • Page 28: Touchscreen

    In the settings there are profiles saved for operation with different screen orientations. These profiles have preset standard configurations that can be modified as desired These settings do not just affect the screen settings on the Tablet PC, but also on external monitors that are connected. Fujitsu...

  • Page 29: Touch Commands

    finger-based operation. Operating system Menu Windows 10 To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats. Fujitsu...

  • Page 30: Using The Stylus

    The stylus can be influenced by electromagnetic fields (cursor quivers or jumps). There may be a few areas on the screen where the cursor quivers slightly in spite of pressing the stylus down firmly. Fujitsu...

  • Page 31: Stylus Location

    Tablet display). On delivery, the stylus is located in the stylus garage: Adjusting the stylus Operating system Menu Windows 10 Under Control Panel - Hardware and Sound - Pen and Touch you can make various settings for the stylus. Fujitsu...

  • Page 32: Replacing The Stylus Tip

    You should also always repeat the calibration if the co-ordination between the stylus and the cursor movement deteriorates. Operating system Menu Windows 10 To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats. Fujitsu...

  • Page 33: Securing The Stylus

    Your device has one eyelet on the left side and one eyelet on the right side for securing the stylus tether (see "Ports and controls", Page 10). The tether eyelet on the right side is shown below. ► Fasten the stylus tether to the stylus eyelet and to the eyelet on the Tablet PC. Fujitsu...

  • Page 34: Tablet Buttons

    Your Tablet PC is fitted with three tablet buttons. Symbol Description Functions Volume up button Increase volume – Volume down button Decrease the volume – – – Shortcut button Call the status area by pressing or start a screenshot function by a long press (depends on configuration) Fujitsu...

  • Page 35: Webcam

    five minutes of hearing the warning alarm, your Tablet PC will switch off automatically. Monitoring the battery state of charge Battery battery charge meter A battery symbol for monitoring the battery capacity is displayed in the system bar / status indicator. The battery symbol shows you the battery charge. Fujitsu...

  • Page 36: Using The Power-Saving Functions

    Tablet PC. Follow the manufacturer’s instructions when handling the memory cards. Memory card Supported formats It supports the following formats: • Micro Secure Digital (SD Card) • Micro SDHC • Micro SDXC Fujitsu...

  • Page 37: Inserting The Memory Card

    ► Open the slot cover (1). ► Carefully slide the storage card into the slot (2). The label area must be facing downward. Do not apply any force, otherwise the delicate contact surfaces could be damaged. Memorycard ► Close the slot cover. Fujitsu...

  • Page 38: Removing The Memory Card

    ► Pull the memory card out of the slot (2). ► Close the slot cover (3). Wireless LAN/Bluetooth wireless components The installation of wireless components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off The wireless components are switched on and off using the appropriate functions of the operating system.

  • Page 39: Configuring Wlan Access

    ► Connect the network cable to your network connection (2). Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Fujitsu...

  • Page 40: Accessories For Your Tablet Pc (Optional)

    Docking cradle for charging the Tablet PC with additional ports • Keyboard cover • Intermediary VESA Mount Plate • TPU cover with shoulder strap • Folio cover • Adapter cables (microHDMI to VGA, Full USB to LAN) The following sections provide more information on handling the accessories. Fujitsu...

  • Page 41: Your Docking Cradle (Optional)

    6 = Microphone port 12 = DC jack socket (DC IN) With STYLISTIC Q507 the LAN port of the cradle supports Wake-on-LAN (G3 only). With STYLISTIC Q507 two additional external monitors can be connected either to the VGA monitor port or to the HDMI Port of the docking cradle. The simultaneous use of two external monitors is supported.

  • Page 42: Setting Up The Cradle

    Cradle ► Remove the AC plug of the AC adapter from the power outlet. ► Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC. Fujitsu...
  • Page 43 AC adapter for the cradle. ► Plug the AC adapter cable into the DC jack (DC IN) on the cradle (2). ► Connect the AC cable to the AC adapter (3). ► Plug the AC cable into the power outlet (4). Fujitsu...

  • Page 44: Disconnecting The Tablet Pc From The Cradle

    ► Press the slide-out button in the direction of the arrow (1) until it firmly remains in pressed position (red marking visible). ► While holding down the lower part of the cradle, lift the Tablet PC off the cradle in the direction of the arrow (2). Fujitsu...

  • Page 45: Keyboard Cover (Optional)

    The keyboard cover is an optimized device for the convenient input of text. It only needs to be docked with the Tablet PC. Components of the keyboard cover Keyboardcover Ports 1 = Release button 3 = Status indicators (Num Lock, Caps Lock, Scroll Lock) 2 = Docking port for the Tablet PC Fujitsu...

  • Page 46: Connecting The Tablet Pc To The Keyboard Cover

    ► Press the release button (1) until it remains in the pressed position (red marking becomes visible). ► Push the Tablet PC onto the keyboard cover in the direction of the arrow, until you feel it engage on the connector (2) and until the release button returns to its original position. Fujitsu...

  • Page 47: Disconnecting The Tablet Pc From The Keyboard Cover

    Disconnecting the Tablet PC from the keyboard cover ► Press the release button (1) until it remains in the pressed position (red marking becomes visible). ► Lift the Tablet PC away from the keyboard cover in the direction of the arrow (2). Fujitsu...

  • Page 48: Intermediary Vesa Mount Plate (Optional)

    ► Position the Intermediary VESA Mount Plate on the Tablet PC (2). Make sure that the screw holes of the Intermediary VESA Mount Plate and of the Tablet PC lie exactly on top of each other. ► Secure the Intermediary VESA Mount Plate with the screws (3). Fujitsu...

  • Page 49: Tpu Cover With Shoulder Strap (Optional)

    1. TPU Cover 2. Shoulder strap 3. Rubber stopper in plastic bag for use in combination with keyboard cover 4. Fujitsu warranty 5. Accessory User Guide Inserting the Tablet PC in the protective TPU cover ► Lay the TPU cover on the table.
  • Page 50 Accessories for your Tablet PC (optional) ► If required, secure the shoulder strap (3) at two of the four holders (a) of the TPU cover. ► Adjust the length of the shoulder strap. Fujitsu...

  • Page 51: Connecting The Tablet Pc/Tpu Cover To The Keyboard Cover

    ► Carefully align the rubber stopper (2) and apply rubber stopper into the support cavity (1) in the direction of the arrow (3). ► Apply finger pressure along the stopper to activate adhesive bonding process. ► Fold out the connector side of the keyboard cover. Fujitsu...
  • Page 52 To prevent damage to the system, never fold the Tablet PC on the keyboard cover if the Tablet PC is in the TPU cover. Do not attach the optional keyboard to the Tablet PC and do not carry both using the TPU cover. The keyboard cover and/or Tablet PC could be damaged. Fujitsu...
  • Page 53 Accessories for your Tablet PC (optional) To disconnect the unit from the keyboard cover, proceed as described in section "Disconnecting the Tablet PC from the keyboard cover ", Page Fujitsu...

  • Page 54: Connecting The Tablet Pc/Tpu Cover Unit To The Docking Cradle

    ► Carefully push the unit onto the cradle in the direction of the arrow (1) until you feel it engage on the connector and until the slide-out position returns to its original position. To disconnect the unit from the docking cradle, proceed as described in section "Disconnecting the Tablet PC from the cradle ", Page Fujitsu...

  • Page 55: Folio Cover (Optional)

    ► Allow the Tablet PC to click into place in the folio cover (2). The following illustration shows you the many ways in which the folio cover can be used: Fujitsu...

  • Page 56: Adapter Cables

    VGA Conversion Adapter Kit, 1 x microHDM to VGA cable Maximum resolution: 1920 x 1080 • Full USB to LAN: LAN Conversion Cable Kit: 1 x Full USB to LAN (GbE, limited performance) For technical specifications, see chapter "Adapter cables (optional)", Page Fujitsu...

  • Page 57: Security Functions

    Tablet PC. Passwords are not covered by your warranty and a charge will be made for assistance. Password protection Your password can be up to 32 characters long and can contain letters and numbers. No distinction is made between uppercase and lowercase. Fujitsu...

  • Page 58: Protecting Bios Setup Utility (Supervisor Password And User Password)

    You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. Password Supervisorpassword User password ► Start the BIOS Setup Utility and go to the Security menu. ► When changing the password, proceed exactly as when assigning a password. Fujitsu...
  • Page 59 ► In the Exit menu, select the option Save Changes & Exit. ► Select Yes and press the Enter key. The Tablet PC is rebooted and the password is removed. Removing the supervisor password simultaneously deactivates the user password. Fujitsu...

  • Page 60: Password Protection For Booting The Operating System

    ► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The Tablet PC reboots. The system is no longer password-protected. Fujitsu...

  • Page 61: Password Protection For The Hard Disk

    ► If you wish to remove a password for a second hard disk (Drive1), in the area Drive1 mark the field Set Master Password and proceed in exactly the same way as for the removal of the first hard disk (Drive0). Fujitsu...

  • Page 62: Connecting External Devices

    Dolby Digital or DTS. To play back HDMI sound, you must change the HDMI sound settings accordingly. You can find the settings under Control Panel - Hardware and Sound. Deactivate the settings for DTS Audio and Dolby Digital to enable playback of HDMI sound. Fujitsu...

  • Page 63: Hdmi Port (Docking Cradle Only)

    You can also switch back and forth between the external monitor and the LCD screen of the Tablet PC, see "Touchscreen", Page You can display the same image on the external monitor and on the LCD screen of the Tablet PC at the same time. Fujitsu...

  • Page 64: Connecting Usb Devices

    ► Tap the symbol for safe removal of the hardware. ► Select the device you wish to shut down and remove. ► Tap OK. Wait for the dialog box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 65: Connecting External Audio Devices

    MP3 player, CD player or a tape deck to your Tablet PC. ► Connect the audio cable to the external device. ► Connect the audio cable to the combined headphones and microphone port of the Tablet PC or to the microphone port of your docking cradle (optional). Fujitsu...

  • Page 66: Settings In Bios Setup Utility

    ► Press the Volume Down button before switching on the Tablet PC. BIOSSetupUtility ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service center. The BIOS Setup Utility starts. Fujitsu...

  • Page 67: Bios Setup Utility Operation

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the "Enter" key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...

  • Page 68: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save changes and power off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 69: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"...

  • Page 70: Executing A Reset

    ► Note the ID number of your device. The ID number is found on the type rating plate on the back or underside of the casing. ► For further clarification of the problem, contact the Fujitsu Service Desk. When you do this, please have ready the ID number and serial number of your system.

  • Page 71: Battery Charging Indicator Does Not Illuminate

    "Intel Graphics Media Accelerator Driver for mobile". The display on the Tablet PC’s touchscreen is difficult to read. Touchscreen Touchscreen Cause Troubleshooting Reflected glare ► Move the Tablet PC into a different position. ► Increase the brightness of the screen. Fujitsu...

  • Page 72: The External Monitor Remains Blank

    Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu...

  • Page 73: The Cursor Does Not Correctly Follow The Stylus Movements

    ► Close the application program or restart malfunction. the Tablet PC (by restarting the operating system or switching the device off and back on again). The battery is dead. ► Charge the battery. ► Connect the AC adapter to the Tablet Fujitsu...

  • Page 74: The Printer Does Not Print

    The maximum brightness may have been set ► Reduce the brightness of the screen to for the screen. lower energy consumption: You will find the setting under Control Panel – Hardware and Sounds – Windows Mobility Center. Fujitsu...

  • Page 75: Error Messages On The Screen

    Press <F1> to resume, <F2> to SETUP This error message appears if an error occurs during the self-test before starting the operating ► To enter the BIOS-Setup-Utility, press system. / Decrease volume button. ► Check date and time settings. Real time clock error Fujitsu...

  • Page 76: Technical Data

    Weight depending on configuration Keyboard Cover weight: 1.5 lbs. Input devices Tablet buttons 3 keys Stylus Stylus with a pressure button Slots Storage card slot 1 x microSD card Ports Combined headphones and microphone port 3.5 mm stereo mini jack Fujitsu...

  • Page 77: Screen Resolutions For Integrated Screen And External Screens

    1920x1200 / – – 60Hz 1920x 3840x2160 / 1200 30Hz 2560x1600 / With 2560x1600 / 30Hz – docking 30Hz 1920x1080 / cradle 1920x1080 / 60Hz 60Hz 1920x1200 / – 60Hz 2560x1600 / – 30Hz 1920x1200 / 1920x1080 / 60Hz 60Hz Fujitsu...

  • Page 78: Wlan Specifications

    *** Network key encryption (WEP) occurs with the number of bits given above, after deduction of the fixed length of 24 bits the user may however also set 40 or 104 bits. **** Depending on the particular practical application, the number of computers which can be networked is reduced if necessary. Fujitsu...

  • Page 79: Rechargeable Battery

    Technical data Rechargeable battery For information on the batteries used in your device, please see "http://solutions.us.fujitsu.com/www/content/support/". 3-cell lithium polymer battery 9030 mAh Rated voltage 3.75 V Rated capacity 34 Wh AC adapter (36 W) for the Tablet PC only (without cradle)

  • Page 80: Ac Adapter (65 W) For The Docking Cradle (Optional)

    10.63 in. x 6.02 in. x. 0.75 in 270 mm x 153 mm x 19 mm Folio cover (optional) Dimensions Width x Depth x Height 18.11 in. x 10.75 in. x 0.63 in 460 mm x 273 mm x 16 mm Fujitsu...

  • Page 81: Adapter Cables (Optional)

    Technical data Adapter cables (optional) microHDMI to VGA: VGA Conversion Adapter Kit, 1 x microHDM to VGA cable Maximum resolution : 1920 x 1080 Full USB to LAN: LAN Conversion Cable Kit: 1x Full USB to LAN (GbE, limited performance) Fujitsu...

  • Page 82: Manufacturer's Notes

    Remember – protecting the environment is a cooperative effort, and we must make every effort to protect it for current and future generations. * To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site "www.shopfujitsu.com"...

  • Page 83: Doc (Industry Canada) Notices

    Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For Authorized Repair Technicians Only CAUTION: For continued protection against risk of fire, replace only with the same type and rating fuse. Fujitsu...

  • Page 84: Energy Star Compliance

    (on battery), the display turns off after 4 minutes. Energy saving benefits: Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the environment.

  • Page 85: Fcc And Ic Regulatory Information

    This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must accept any interference, including interference that may cause undesired operation of this device. Fujitsu...
  • Page 86 ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C, and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposure guidelines when tested with the device operating conditions. Fujitsu...
  • Page 87 : (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnement de l’appareil. Toute modification n’ayant pas été expressément approuvée par la société Fujitsu America Incorporated peut annuler le droit de l’utilisateur de se servir du matériel.

  • Page 88: Canada, Industry Canada (Ic)

    In addition, users are cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Fujitsu...

  • Page 89: Avis Pour Le Canada

    (ce qui signifie qu’ils sont prioritaires) des bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférences et/ou des dommages aux appareils de réseau exempts de licence. Fujitsu...

  • Page 90: Appendix

    IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode. • The WLAN devices support the following encryption methods - WEP, TKIP, CKIP, and AES encryption. • The Wireless LAN devices are compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0. Fujitsu...

  • Page 91: Wireless Lan Modes Using This Device

    That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically configured on all computers in the Ad Hoc network. Fujitsu...
  • Page 92 (e.g., file servers, printers, databases). * = An optional hub for a wired LAN may ** = ADSL modem, cable modem, or similar be required depending upon the type of access point used. Fujitsu...

  • Page 93: Deactivating/Disconnecting The Wlan Device

    The wireless components are switched on and off using the appropriate functions of the operating system. ► To switch wireless components on and off individually, selectSettings Network & Internet - WiFi - On / Off. Fujitsu...

  • Page 94: Configuring The Wireless Lan

    After you have configured your computer, you can connect to an active network by performing the following steps: 1. Click on the WLAN icon in the system tray. 2. Select Connect to a network. 3. Select a network from the list that appears, and click the Connect button. Fujitsu...

  • Page 95: Troubleshooting The Wlan

    Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for better sight. Fujitsu...
  • Page 96 LAN device to associate but not authenticate to the wireless network. Incorrect IP address This only applies to networks configuration using static IP addresses. Please contact your network administrator for the correct settings. Fujitsu...

  • Page 97: Using The Bluetooth Device

    Users are not authorized to modify this product. Any modifications invalidate the warranty. This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty.

  • Page 98: Image Backup And Recovery Procedures

    It is also important that you create a backup of the content of the C:\Drivers folder on your system to writable media or an external drive. System-specific software drivers are also available for download through the Fujitsu support site. Note: Most of the information below comes from the Microsoft® page "http://windows.microsoft.com/en-us/windows-10/windows-10-recovery-options".
  • Page 99 If that doesn’t fix the problem, try Troubleshoot - Recover from a drive. This will remove your personal files, apps and drivers you installed, and changes you made to settings. If you repartitioned the drive Windows is installed on, note that this will restore the drive’s default partitions. Fujitsu...
  • Page 100 A message will be displayed during this time stating Please wait while the content is being processed. 6. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue. 7. The Fujitsu Software Auto Installer user interface will be launched providing the ability to auto install the software downloaded from the support site.

  • Page 101: Downloading Driver Updates

    To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view and download the most current drivers, utilities and applications to determine whether you have the latest versions.

  • Page 102: Index

    Mobile operation 15 Declarations of conformity 7 Monitor Display Port 61 connection 61 DOC (INDUSTRY CANADA) NOTICES 81 no image 70 remains blank 70 unstable image 70 Ending Monitor connection see VGA port 61 energy saving mode 71 Energy Fujitsu...
  • Page 103 55 Service life, battery 33 Set up USB ports 62 Device 19 User password Setup change 56 entering 56 see BIOS Setup Utility 64 Slot removing 57 Memory cards 34 Status indicators 23 Stylus 28 VGA port 61 Fujitsu...
  • Page 104 Index Wireless LAN Webcam 33 Safety notes 14 Winter time 68 Wrong date/time 68 Wireless components Safety notes 14 Fujitsu...

Table of Contents