Showroom Mode - Wolf Induction Cooktop Technical & Service Manual

Induction Cooktop
Electronic Control

Showroom Mode

This mode deactivates the induction coils while still giving
the user complete functionality of the controls at either
SIM OFF ON HIGH
120V or 240V power.
To activate Showroom Mode
From LOCK MODE, Press and hold the front element
"MELT" keypad for 5 seconds. The controls will enter
showroom mode. (See Figure 3-17)
MELT OFF ON
HIGH
Touch and
NOTE: If any other key pad sensor detects another input
Hold "Melt" Key Shr
signal, the Showroom Mode will not engage. CLEAR
for 5 Sec.
NOTE: If the "MELT" key pad is not released after 7
OFF
seconds, the Showroom Mode will be cancelled and not
Figure 3-17 Entering or Exiting Showroom Mode
engaged. The unit will return to Lock Mode.
The controls will light all LEDs for 5 seconds to let the
user know that showroom mode has been entered.
During showroom mode "Shr" will be continually
SIM OFF ON HIGH
displayed in the timer display unless the "CLEAR", '+" or
"-" key is pressed. Once there are no key presses for 5
minutes the "Shr" will return.
While in Showroom Mode, all inductors will be disabled
and all visual and audible feedback will function as
normal.
MELT OFF ON HIGH
To exit Showroom Mode
000
CLEAR
From LOCK MODE, Press and hold the front element
OFF
"MELT" keypad for 5 seconds. The controls will exit the
showroom mode. (See Figure 3-17)
Touch and
Hold "OFF" Key
The Controls will go through the start up sequence to
for 5 Sec.
indicate that the showroom mode has been exited.
NOTE: An interruption of power will also exit the
showroom mode and the unit will start up in LOCK mode
Figure 3-18 Entering Diagnostics Mode
when power is restored.
NOTE: If any other key pad sensor detects another
input signal, the Showroom Mode will not dis-engage.
NOTE: If the "MELT" key pad is not released after 7
seconds, the Showroom Mode will not be cancelled. The
unit will return to Lock Mode in the Showroom Mode.
3-11