Control Operation; Residual Heat Indicators; Modes Of Operation; Lock Mode - Wolf CT15I Technical & Service Manual

Operation Information
INDUCTION COOKTOP OPERATION

Control Operation

The Wolf Induction cooktop operates by automatically cycling the heating elements between zero power and full
power. As the heat is increased on the control panel, the element will stay on at full power for longer periods and
the element will have shorter periods of zero power.

Residual Heat Indicators

As an added safety precaution, residual heat indicator lights will illuminate when the surface temperature of the
glass is above 150°F. Each heating element has an independently controlled light located to the right of that ele-
ment. Even if the cooktop controls are turned off, the indicator light(s) will illuminate to show the user that the cook-
top surface remains hot.

Modes of Operation

Lock Mode: All keypad operation on the control panel is disabled and all of the heating elements are
de-energized. A steady glowing light within the "key" symbol indicates the unit is locked.
• To unlock the control, touch and hold the "key" symbol for 3 seconds. The unit will beep twice and the light
with-in the "key" symbol will go out. The control unit is now in the idle mode. (See Figure 3-4).
• To lock the control, touch and hold the "key" symbol for three seconds. The unit will beep three times
and the light within the "key" symbol will illuminate. (See Figure 3-4).
NOTE: When the unit is powered up for the first time or if there was a power outage, the unit will default to this
mode.
Idle Mode: After unlocking the control panel as described in Lock Mode, the unit enters the idle mode of operation.
The only valid keypad operations are the "OFF /ON" for each element and the "key" symbol.
MELT
MELT
Figure 3-3. Control Panel
-
+
HIGH
OFF/ON
-
+
HIGH
OFF/ON
OFF
I I n n d d u u c c t t i i o o n n C C o o o o k k t t o o p p
MELT
MELT
Figure 3-4. Lock Key
3-4
-
+
HIGH
OFF/ON
-
+
HIGH
OFF/ON
OFF