Wolf Induction Cooktop Technical & Service Manual page 13

Counter top Cut-out Dimensions (CT30I )
This cooktop is designed to fi t a standard 33" (838mm)
width base cabinet with a 25" (635mm) deep counter
top. Before making the counter top cut-out, verify that
the cooktop will clear the side walls of the base cabinet
below. A Wolf 30" (762mm) or 36" (914mm) built-in
single oven may be installed below Model CT30I. For
this installation, unless the cabinets are deeper than 24"
(610mm), it is recommended that the electrical supply be
placed in the base cabinet to the right of the oven. Refer
to installation instructions provided with the built-in oven
for additional specifi cations. (See Figure 2-5 & 2-6)
NOTE: Locate the junction box within reach of the 48"
(1219 mm) conduit, and accessible when the cooktop unit
is installed.
13" max
(330)
19-1/4"(489)
2"**
COOKTOP
(51)
CUT-OUT
DEPTH
24" min
NOTE: *Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457mm)
above counter top. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up to 18" (457mm)
above counter top.
NOTE: Unit dimensions may vary to ±1/8" (3mm).
Induction Cooktop
18"
(457)
2-1/2" min
(64)
36" (914)
(610)
STANDARD
FLOOR TO
COUNTER
HEIGHT
Figure 2-6 CT30I Counter top Cut-Out
COOKTOP CUT-OUT
2-1/2" MIN
(64)
FRONT OF COUNTERTOP
Figure 2-5 CT30I Counter top Cut-Out Top View
33" (838) RECOMMENDED
CABINET WIDTH
2"* min (51) 30" min (762)
CUT-OUT TO
28-3/8" (721) COOKTOP
COMBUSTIBLE
CUT-OUT WIDTH
MATERIALS
BOTH SIDES
4-1/2"(114)
3 3 /4" min
(95)
30" OVEN OPENING
2-5
Installation Information
28-2/8" (721)
WIDTH
19-1/4" (489)
CUT-OUT
30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
(89) E
3-1/2"
10"
(254)
COOKTOP
DEPTH