Wolf Induction Cooktop Technical & Service Manual page 46

Troubleshooting Guide
Error Displayed
Priority Error #
2 E30
2 E31
2 E32
2 E33
2 E34
2 E40
2 E41
2 E42
2 E43
2 E44
2 E45
2 E50
2 E51
2 E52
Induction Cooktop
Error
Condition
Generator 1: Effected burner is not available.
Burner
(F,FR,FC) 'ON
LED' Failure
Generator 1:
Burner
(R,RR,RC) 'ON
LED' Failure
Generator 2:
Burner (RL)
'ON LED'
Failure
Generator 2:
Burner (FL)
'ON LED'
Failure
Generator 3:
Burner (RR)
'ON LED'
Failure
Generator 1: The effected burner will shutdown.
Burner
(R,RR,RC)
sensor shorted.
Generator 2:
Burner (RL)
sensor shorted.
Generator 3:
Burner (RR)
sensor shorted.
Generator 1: The effected burner will shutdown.
Burner
(R,RR,RC)
sensor open.
Generator 2:
Burner (RL)
sensor open.
Generator 3:
Burner (RR)
sensor open.
Generator 1: The effected burner will shutdown.
Open heat sink
thermistor.
Generator 2:
Open heat sink
thermistor.
Generator 3:
Open heat sink
thermistor.
Notes
5-8
Possible Source(s) of Failure
LED board failure.
Action: Perform the LED test #1
and if all LEDs work reset error.
Action: If one of the LEDs fails
to illuminate change the Glass
Assy.
Induction generator failure.
Action: Change affected
generator board.
Induction generator failure.
Action: Change affected
generator board.
1. Induction generator failure.
Action: Perform Heatsink test
#4 and if all appear ok reset the
error and test operation
2. If error returns.
Action: Change affected
generator board