Wolf Induction Cooktop Technical & Service Manual page 42

Troubleshooting Guide
ERROR CODE INDICATOR (continued)
6. Pressing the "+" & "-" keys of the 3000W will allow you to step through any of the recorded error codes. If there are
not additional error codes, pressing the "+" key will advance you to the Power Cycling Information Data.
7. When there are no errors stored or if you are displaying the fi rst error code, a press of the 3000W "-" key will step the
user back to the Heat Sink Thermistor Temperature Test.
8. Stored Error code history can be cleared by touching and holding the "OFF ON" keypad of the 1200W element
controls for 5 seconds.
Step Action
1 3000W '+' key is pressed. 6 LEDs on
2 1200W '+' key is pressed. 6 LEDs on
3 1200W '+' key is pressed. 6 LEDs on
4 1200W '+' key is pressed. 6 LEDs on
5 1200W '+' key is pressed. 6 LEDs on
6 1200W '-' key is pressed. 6 LEDs on
7 1200W '-' key is pressed. 6 LEDs on
8 1200W '-' key is pressed. 6 LEDs on
9 3000W '+' key is pressed. 6 LEDs on
Note: The above information is interpreted as 01+23+45+67 or 1,234,567 minutes, as shown in the example to the left.
POWER CYCLING INFORMATION (Sixth Test) (how many power cycles since unit originally energized)
1. To enter Power Cycling Information, touch the "+" keypad of the 3000W element controls.
2. The 3000W bar lights will show 7 LEDs and fl ash at a rate of .75 seconds ON and .25 seconds OFF.
3. The timer display will show "axx" where xx is the two most signifi cant digits of an eight digit decimal display.
4. Pressing the "+" key on the 1200W display will show the next signifi cant pair of numbers "bxx"
5. Pressing the "+" key will display the next pair "cxx"
6. The fi nal press of the "+" key will show the least signifi cant pair "dxx"
7. At any time, the "-" key can be used to move from the least to the most signifi cant pairs of numbers.
8. A press of the 3000W "-" key will step the user back to the Error Code Indicator.
SOFTWARE VERSION (Seventh Test)
1. To enter Software Version, touch the "+" keypad of the 3000W element controls.
2. The 3000W bar lights will show 15 LEDs and fl ash at a rate of .75 seconds ON and .25 seconds OFF.
3. The 3 digit display will illuminate the software version (scrolling if necessary).
4. A press of the 3000W "-" key will step the user back to the Power Cycling Information.
Induction Cooktop
3000W Display 1200W Display Timer Display
1 LED on
1 LED on
1 LED on
1 LED on
1 LED on
1 LED on
1 LED on
1 LED on
2 LEDs on
Figure 5-3
5-4
E xx
a 01
b 23
a 0 1
c 45
d 67
c 45
0 1
b 23 ,
a 01
E xx
Example
b 2 3
c 4 5
d 6 7
2 3 4 5 6 7 Minutes
,