Answering system
Answering system settings
Number of rings
You can set the answering system to answer an incoming call after two, three,
four, five or six rings. You can also select toll saver. If toll saver is selected, the
answering system answers a call after two rings when you have new messages,
or after four rings when there are no new messages. By default, the answering
system answers an incoming call after four rings.
To set the number of rings:
Using a cordless handset or the telephone base:
1. When the handset or telephone base is in idle mode, press MENU/
enter the main menu.
2. Press q
or p
CID
3. Press q
or p
CID
4. Press q
or p
CID
5. Press q
or p
CID
6. Press
/�ELECT to save the setting.
MENU
Remote access code
To access your answering system remotely from any touch-tone phone, you
need to enter a two-digit number (00-99). By default, the remote access code
is 19.
To change the remote access code:
Using a cordless handset or the telephone base:
1. When the handset or telephone base is in idle mode, press MENU/
to enter the main menu.
2. Press q
or p
CID
3. Press q
or p
CID
4. Press q
or p
CID
5. Use the dialing keys to enter a
a digit, press
telephone base.
6. Press
/�ELECT to save the setting.
MENU
to scroll to >Answering sys, then press
DIR
to scroll to >Ans sys setup, then press
DIR
to scroll to > # of rings, then press
DIR
to choose among >2, >3, >4, >5, >6 or >Toll saver.
DIR
to scroll to >Answering sys, then press
DIR
to scroll to >Ans sys setup, then press
DIR
to scroll to >Remote code, then press
DIR
/DELETE on the handset or X/DELETE on the
MUTE
2-digit number. To backspace and delete
36
�ELECT
/�ELECT.
MENU
/�ELECT.
MENU
/�ELECT.
MENU
�ELECT
/�ELECT.
MENU
/�ELECT.
MENU
/�ELECT.
MENU
to