Number Of Rings - AT&T CL82115 User Manual

Answering system
Answering system settings

Number of rings

You can set the answering system to answer an incoming call after
two, three, four, five or six rings. You can also select toll saver. If
toll saver is selected, the answering system answers a call after two
rings when you have new messages, and after four rings when there
are no new messages. This feature allows you to check for new
messages and avoid paying long distance charges when calling from
out of your local area. By default, the answering system answers an
incoming call after four rings.
To set the number of rings:
1. When the handset is in idle mode, press MENU/
to enter the main menu.
SELECT
2. Press or
CID DIR
then press /SELECT.
MENU
3. Press or
CID DIR
then press /SELECT.
MENU
4. Press or
CID DIR
press /SELECT.
MENU
5. Press or
CID DIR
6 or Toll saver.
6. Press /SELECT to save the setting. You hear a confirmation
MENU
tone.
NOTES:
• If you subscribe to voicemail service through your telephone service provider, see
Answering system and voicemail indicators on page 81.
• If you set the number of rings for the answering system as two or three rings, the
caller ID announce feature may not have enough time to announce the caller's full
information.
to scroll to Answering sys,
to scroll to Ans sys setup,
to scroll to # of rings, then
to choose among 2, 3, 4, 5,
77
Call screening
># of rings
# OF RINGS
>4