Message Alert Tone; Message Recording Time - AT&T CL84102 User Manual

Answering system
Answering system settings

Message alert tone

When the message alert tone is set to On, and there is at least one new
message, the telephone base beeps every 10 seconds.
message alert tone is set to off.
There is no audible alert at the handset.
Using a cordless handset or the telephone base:
1. When the handset or telephone base is in idle mode, press MENU/
to enter the main menu.
2. Press q or p
CID
/�ELECT.
MENU
3. Press q or p
CID
4. Press q or p
CID
5. Press q or p
CID
6. Press /�ELECT to save the setting.
MENU

Message recording time

You can set the recording time allowed for incoming messages. The message
length is three minutes by default.
Using a cordless handset or the telephone base:
1. When the handset or telephone base is in idle mode, press MENU/
to enter the main menu.
2. Press q or p
CID
3. Press q or p
CID
4. Press q or p
CID
Press q or p
5.
CID
press /�ELECT to save the setting.
MENU
to scroll to >Answering sys, then press
DIR
to scroll to >Ans sys setup, then press
DIR
to scroll to >Msg alert tone, then press
DIR
to choose >On or >Off.
DIR
to scroll to >Answering sys, then press
DIR
to scroll to >Ans sys setup, then press
DIR
to scroll to >Recording time, then press
DIR
to choose >3 minutes, >2 minutes or >1 minute, then
DIR
37
By default, the
�ELECT
/�ELECT.
MENU
/�ELECT.
MENU
�ELECT
/�ELECT.
MENU
/�ELECT.
MENU
/�ELECT.
MENU