Page 1
INSTRUCTIONS MANUAL DE INSTRUCCIONES HARD DISK CAMCORDER VIDEOCÁMARA CON DISCO DURO GZ-MG230 Dear Customer Thank you for purchasing this hard disk camera. Before use, please read the safety information and precautions contained in pages 2 and 3 to ensure safe use of this product.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
Page 3
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Easy Start Guide Preparation Attach the battery pack Charge the Battery Pack. pg. 14) Video recording Select (video) mode Playing back Select (video) mode Open the lens cover BATT. Open the LCD monitor The camera turns on automatically. Select recording (REC) mode [ 5 h 5 6 m ] SELECT PLAY/REC...
Page 5
CAUTION: Touch the sensors with your fi nger. The sensors do not function if you touch them with your fi nger nail or with gloves on. When [SET DATE/TIME!] appears, select [YES] within 10 seconds. SET DATE/TIME! pg. 6) Press the START/STOP button to start recording Select the desired fi...
Page 6
How to Select an Item Using the Touch Sensor An example screen in English is used for the guidance below. Selecting an item from the menu list (on the menu screen) MENU IMAGE QUALITY IMAGE SIZE GAIN UP BASIC SETTINGS Q Slide your fi...
Page 7
Make a backup of important recorded data JVC will not be responsible for any lost data. It is recommended to copy your important recorded data to a DVD or other recording media for storage. ( Make a trial recording Before the actual recording of important data, make a trial recording and play back the recorded data to check that the video and sound have been recorded correctly.
Adobe’s web site: http://www.adobe.com/ NOTE Select your desired language with a single click. The model name is indicated on the bottom of your camcorder. PC OPERATION File Backup on a Windows System Requirements ... 23 Software Installation ... 24 Connecting the Camera to the PC ...
GETTING STARTED Accessories AC Adapter AP-V18U/14U CD-ROM pg. 24, 28) NOTE Make sure to use the provided cables for connections. Do not use any other cables. Attaching the Core Filter to the USB Cable Connect the end of the cable with the core fi lter to the camera. Release the stopper.
Index NOTES • The LCD monitor can rotate 270°. • Power-linked operation You can also turn the camera on/off by opening/closing the LCD monitor during the recording mode. • Be careful not to cover 4, 6 and 8 during shooting.
Page 11
Camera ! Touch Sensor ( pg. 6) # OK (DISP) Button [OK/DISP] ( $ Menu Button [MENU] % Power Switch [POWER] (You can turn off the camera by pressing and holding this button.) & Speaker ( Playback/Recording Mode Switching Button [SELECT PLAY/REC] ( ) Access/Charge Lamp [ACCESS/CHARGE] (Blinks when you access fi...
Indications on LCD Monitor During both Video and Still Image Recording 1/250 JA N . 2 0 . 2 0 0 8 4:55PM ! Selected Operation Mode Indicator : Auto Mode : Manual Mode # Effect Mode Indicator $ Tele Macro Mode Indicator % Program AE Mode Indicator &...
Page 13
During Video Playback JA N . 2 0 . 2 0 0 8 4:55PM ! Mode Indicator ( pg. 18) # Effect Mode Indicator $ Wipe/Fader Effect Indicator : Playlist Playback Indicator (Appears when playing back a playlist.) ¨ª : Event Search Playback Indicator (Appears when playing back a video fi...
Necessary Settings before Use Charging the Battery Pack Close the LCD monitor to turn off the camera. Attach the battery pack. Slide the battery pack down until it locks in place. Bottom of the Camera Connect the AC adapter. DC Jack AC Adapter •...
NOTES • If “COMMUNICATING ERROR” appears, there may be a problem with your battery. In such a case, consult your nearest JVC dealer. • The recordable time display should only be used as a guide. It is displayed in 10 minute units.
Recording Files Video Recording Preparation: Open the LCD monitor to turn on the camera. Slide the mode switch to select (video) mode. To stop recording Press the START/STOP button again. To view the video you just recorded Select during pause. During the preview, you can delete the video by selecting To change the picture quality...
Still Image Recording Preparation: Open the LCD monitor to turn on the camera. Slide the mode switch to select (still image) mode. To view the image you just recorded Select after shooting. During the preview, you can delete the image by selecting To change the picture quality Change the settings in [IMAGE QUALITY] from the MENU.
Playing Back Files Video/Still Image Playback Slide the mode switch to select (video) or (still image) mode. Press the SELECT PLAY/REC button to select playback mode. SELECT PLAY/REC The index screen for videos appears. Operations during Video Playback : Return to the fi rst scene of the fi le : Go to the fi...
Watching Images on TV Preparation: • Turn off all units. AV Jack DC Jack AC Adapter NOTE This camera is designed to be used with NTSC-type color television signals. It cannot be used with a television of a different standard. Turn on the camera and the TV.
Managing Files CAUTION Do not remove the recording medium or perform any other operation (such as turning off the power) while accessing fi les. Also, be sure to use the provided AC adapter, as the data on the recording medium may be corrupted if the battery becomes exhausted during operation.
Page 21
Select [EXECUTE AND QUIT] (when performing [DELETE]) or [YES] (when performing [PROTECT]). EXECUTE AND QUIT Deleting/Protecting All Files After performing steps 1-2 ( Select [DELETE ALL] or [PROTECT ALL]. When [DELETE ALL?] or [PROTECT ALL?] appears, select [YES]. DELETE ALL? (EXCEPT PROTECTED FILE) To quit the screen Select [QUIT].
Copying Files Types of Copying and Connectable Device The Camera You can copy video/still images from HDD onto microSD card or from microSD card to HDD with this camera alone. DVD Burner (CU-VD3) You can copy video fi les recorded on this camera onto DVD discs.
PC OPERATION File Backup on a Windows Install the software that came with the camera to your PC. You can back up your fi les on your PC with a simple one-touch operation, edit your fi les on your PC, and also create discs. Even if you do not install the software, you can still back up your fi...
File Backup on a Windows Software Installation Please read the “JVC SOFTWARE LICENCE AGREEMENT” in the CD-ROM instruction before you install software. The following software is included in the CD- ROM that came with your camera. • CyberLink DVD Solution...
Select the desired language and click [OK]. Click [Yes]. The software installation starts. Click [Finish]. When installation is completed The installed software is displayed in [All Programs]. The backup destination folder [MyWorks] for fi les is created on the hard disk drive that has the most free space.
File Backup on a Windows When you have fi nished operation Always follow the procedures below when disconnecting the camera, or turning off the power of the camera/PC. Failing to do so may cause damage to the camera and PC. 1) Confi...
Click [EVERIO_HDD] or [EVERIO_ SD]. When the progress bar disappears, the process is complete. File Backup on the PC without Using Software Preparation: Connect the camera to the PC with the USB cable. ( pg. 25) On the PC, create a folder to back up fi...
Other Windows Getting More Use of the Software For more information on operations of the software, see the Tutorials for each software program or the User’s Guides. PowerCinema NE for Everio Double-click the PowerCinema NE for Everio icon. Start PowerCinema NE for Everio. Click [Tutorial].
Folder Structure and Extensions Recording medium [DCIM] [XXXJVCSO] [XXXJVCSO] [XXXJVCSO] [SD_VIDEO] [MGR_INFO] [PRGXXX] [PRGXXX.PGI] [MOVXXX.MOD] [MOVXXX.MOI] [PRGXXX] [PRGXXX] [EXTMOV] [MOV_XXX.MOD] [DEM_XXX.MPG] [MISC] [PRIVATE] * Information such as the date and time of recording, recorded with the video fi le. Extensions Video fi...
File Backup on a Macintosh You can back up camera fi les onto your computer. System Requirements Hardware: Macintosh must be standard equipped with USB 2.0 port Mac OS X (v10.3.9, v10.4.2 to v10.4.10) Connecting the Camera to the Macintosh Preparation: Close the LCD monitor to turn off the camera.
File Backup on the Macintosh Preparation: Connect the camera to the computer with the USB cable. ( pg. 30) On the computer, create a folder to back up fi les into. Open the LCD monitor to turn on the camera. On the camera, select [PLAYBACK ON PC].
Contact us for Information on the Provided Software Use of this software is authorized according to the terms of the software license. When contacting the nearest JVC offi ce or agency in your country (refer to the JVC Worldwide Service Network at http://www.jvc-victor.co.jp/english/worldmap/index-e.html) about this software, please have the following information ready.
If the problem is not solved, reset the camera. ( • If the problem persists, please consult your nearest JVC dealer. To reset the camera 1) Close the LCD monitor to turn off the camera and remove the power supply (battery pack or AC adapter) from the camera, then reattach it.
Troubleshooting Trouble The focus is not adjusted automatically. The continuous shooting speed is slow. Playback cannot be performed. During video playback, indicator fl ashes. Files cannot be deleted. The data process is too slow after the power is switched on or the mode is changed.
Warning Indications Indication (Battery indicator) SET DATE/TIME! CHECK LENS COVER HDD ERROR! MEMORY CARD ERROR! VIDEO MANAGEMENT FILE IS BROKEN. TO RECORD/PLAYBACK VIDEO, RECOVERY IS REQUIRED. RECOVER? RECORDING FAILURE POWER IS OFF, OR USB DEVICE IS UNSUPPORTED DROP DETECTION WORKED AND THE POWER IS TURNED OFF Meaning/Action •...
Specifi cations Camera For general Power supply DC 11 V (Using AC adapter) DC 7.2 V (Using battery pack) Power consumption Approx. 2.7 W* * When the monitor backlight is set to [STANDARD] mode. Dimensions (W x H x D) 113 mm x 68 mm x 54 mm (4-1/2"...
Page 37
Approximate recording time (minutes) (for video) Recording medium Quality ULTRA FINE FINE NORMAL ECONOMY Approximate number of storable images (for still image) Recording medium Image size/Quality 640 x 480 / FINE 640 x 480 / STANDARD Required charging/recording time (approx.) * When the monitor backlight is set to [STANDARD] mode.
AC wall outlet other than American National Standard C73 series type use an AC plug adapter, called a “Siemens Plug”, as shown. For this AC plug adapter, consult your nearest JVC dealer. Battery Packs The supplied battery pack is a lithium-ion battery. Before...
Page 39
Changes or modifi cations not approved by JVC could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Precauciones de seguridad ADVERTENCIA: PARA EVITAR RIESGO DE INCENDIOS O ELECTROCUCIONES, NO EXPONGA ESTE APARATO A LA LLUVIA O HUMEDAD. NOTAS: • La placa de valores nominales y la precaución de seguridad se encuentran en la parte inferior y/o en la parte posterior de la unidad principal. •...
Page 43
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 1. Lea estas instrucciones. 2. Conserve estas instrucciones. 3. Preste atención a las advertencias. 4. Siga todas las instrucciones. 5. No utilice este aparato cerca del agua. 6. Limpie sólo con paño seco. 7. No bloquee ninguna abertura de ventilación. Instale de acuerdo con las instrucciones del fabricante.
Page 44
Guía de inicio rápido Preparación Instale la batería. Cargue la batería. p. 14) Grabación de vídeo Seleccione el modo Reproducción Seleccione el modo Abra la cubierta del objetivo BATT. (vídeo) (vídeo) Abra la pantalla LCD La cámara se enciende automáticamente. Seleccione el modo de grabación (REC) [ 5 h 5 6 m ] SELECT...
Page 45
PRECAUCIÓNE: Toque los sensores con el dedo. Los sensores no funcionan si los toca con la uña o con guantes puestos. Cuando aparezca [¡AJUSTE FECHA/HORA!], seleccione [SÍ] antes de 10 segundos ¡AJUSTE FECHA/HORA! SÍ p. 6) Pulse el botón START/STOP para empezar la grabación Seleccione el archivo deseado mediante el sensor táctil.
Page 46
Cómo seleccionar un elemento con el sensor táctil A continuación se presenta una pantalla de ejemplo en inglés como guía. Selección de un elemento de la lista de menús (en la pantalla de menú) MENU IMAGE QUALITY IMAGE SIZE GAIN UP BASIC SETTINGS Q Deslice el dedo en el sensor arriba y abajo.
Page 47
Realice una copia de seguridad de los datos importantes que haya grabado JVC no se responsabilizará de ninguna pérdida de datos. Se recomienda que guarde los datos importantes que haya grabado copiándolos en un DVD o cualquier otro soporte de grabación.
Page 48
Contenido PREPARATIVOS Accesorios ... 9 Colocación del fi ltro de núcleo en el cable USB ... 9 Índice ... 10 Indicaciones en la pantalla LCD ... 12 Ajustes preliminares necesarios ... 14 Carga de la batería ... 14 Ajuste de la fecha/hora ... 14 Otros ajustes ...
PREPARATIVOS Accesorios Adaptador de CA Batería Cable de audio/ Cable USB BN-VF808U p. 22, 25 y 30) AP-V18U/14U vídeo CD-ROM Filtro de núcleo p. 24, 28) NOTA Asegúrese de utilizar los cables suministrados para las conexiones. No utilice ningún otro cable. Colocación del fi...
Índice NOTAS • La pantalla LCD puede girar 270°. • Funcionamiento siempre listo para grabar La cámara también se puede encender y apagar abriendo y cerrando la pantalla LCD durante el modo de grabación. • Procure no tapar 4, 6 y 8 durante la fi...
Page 51
Cámara ! Sensor táctil ( p. 6) # Botón de aceptar (pantalla) [OK/DISP] p. 13) $ Botón de menú [MENU] % Interruptor de alimentación [POWER] (La cámara se puede apagar manteniendo pulsado este botón.) & Altavoz ( Botón de cambio de modo de reproducción/grabación [SELECT PLAY/ REC] ( p.
Indicaciones en la pantalla LCD Durante la grabación de vídeo e imágenes fi jas 1/250 JA N . 2 0 . 2 0 0 8 4:55PM ! Indicador del modo de funcionamiento seleccionado : Modo automático : Modo manual # Indicador de modo de efectos especiales $ Indicador de modo telemacro % Indicador de modo del programa AE &...
Page 53
Durante la reproducción de vídeo JA N . 2 0 . 2 0 0 8 4:55PM ! Indicador de modo ( p. 18) # Indicador de modo de efectos especiales $ Indicador de efectos de cortinilla/fundido : Indicador de reproducción de lista de reproducción (Aparece al reproducir una lista de reproducción.) ¨ª...
Ajustes preliminares necesarios Carga de la batería Cierre la pantalla LCD para apagar la cámara. Instale la batería. Inserte la batería en su compartimiento hasta que encaje. Base de la cámara Conecte el adaptador de CA. Conector de CC Adaptador de CA •...
Si aparece “ERROR DE COMUNICACIÓN”, puede que exista algún problema en la batería. En tal caso, póngase en contacto con su distribuidor JVC más cercano. • El tiempo de grabación restante sólo debe utilizarse a modo orientativo. Se muestra en unidades de 10 minutos.
Grabación de archivos Grabación de vídeo Preparativos: Abra la pantalla LCD para encender la cámara. Deslice el interruptor de modo para seleccionar el modo (vídeo). Para detener la grabación Pulse de nuevo el botón START/STOP. Para ver el vídeo recién grabado Seleccione durante la pausa.
Grabación de imágenes fi jas Preparativos: Abra la pantalla LCD para encender la cámara. Deslice el interruptor de modo para seleccionar el modo (imagen fi ja). Para ver la imagen recién grabada Seleccione tras tomar la fotografía. Durante la vista preliminar se puede eliminar la imagen seleccionando Para cambiar la calidad de la imagen Cambie los ajustes en [CALIDAD DE...
Reproducción de archivos Reproducción de vídeo/imágenes fi jas Deslice el interruptor de modo para seleccionar el modo (imagen fi ja). Pulse el botón SELECT PLAY/ REC para seleccionar el modo de reproducción. SELECT PLAY/REC Aparece la pantalla de índice para vídeos. Operaciones durante la reproducción de vídeo : Volver a la primera escena del archivo...
Visionado de imágenes en el televisor Preparativos: • Apague todas las unidades. Conector AV Conector de CC Adaptador de CA NOTA Esta cámara está diseñada para ser utilizada con señales de televisión en color tipo NTSC. No se puede usar con un televisor de otra norma. Encienda la cámara y el televisor.
Gestión de archivos PRECAUCIÓN No extraiga el soporte de grabación ni realice ninguna otra operación (por ejemplo, apagar la alimentación) mientras se accede a los archivos. Asimismo, asegúrese de utilizar el adaptador de CA suministrado, ya que los datos del soporte de grabación se pueden dañar si la batería se agota durante la operación.
Page 61
Seleccione [EJECUTAR Y SALIR] (al ejecutar [ELIMINAR]) o [SÍ] (al ejecutar [PROTEGER]). EJECUTAR Y SALIR Eliminación/protección de todos los archivos Después de realizar los pasos 1-2 p. 20) Seleccione [ELIMINAR TODO] o [PROT. TODO]. Cuando aparezca [¿ELIMINAR TODO?] o [¿PROTEGER TODO?], seleccione [SÍ].
Copia de archivos Tipos de copia y dispositivos conectables La cámara Se pueden copiar imágenes fi jas de la unidad de disco duro a la tarjeta microSD o a la inversa en la propia cámara. Grabadora de DVD (CU-VD3) Se pueden copiar en discos DVD archivos de vídeo fi...
FUNCIONAMIENTO DE PC Copia de seguridad de archivos en un PC con Windows Instale el software suministrado con la cámara al PC. Puede hacer una copia de seguridad de los archivos en el PC con una sola operación, editar los archivos en el PC y crear discos. Aunque no instale el software, puede hacer una copia de seguridad de los archivos en el PC.
Copia de seguridad de archivos en un PC con Windows Instalación del software Lea el “Convenio de licencia del software de JVC” del CD-ROM de instrucciones antes de instalar el software. El CD-ROM suministrado con la cámara contiene el siguiente software.
Seleccione el idioma deseado y, a continuación, haga clic en [Aceptar]. Haga clic en [Sí]. Se inicia la instalación del software. Haga clic en [Finalizar]. Cuando fi naliza la instalación El software instalado se muestra en [Todos los programas]. La carpeta de destino de la copia de seguridad de los archivos [MyWorks] se crea en la unidad de disco duro que tenga más espacio libre.
Copia de seguridad de archivos en un PC con Windows Cuando haya fi nalizado la operación Siga siempre los procedimientos descritos a continuación para desconectar la cámara o apagar la alimentación de la cámara y el PC. De lo contrario, podría dañar la cámara y el PC.
Haga clic en [EVERIO_HDD] o [EVERIO_SD]. Cuando desaparezca la barra de progreso, el proceso se habrá completado. Copia de seguridad de archivos en el PC sin usar el software Preparativos: Conecte la cámara al PC con el cable USB. p. 25) En el PC, cree una carpeta para almacenar los archivos de seguridad.
Otras operaciones de PC con Windows Uso adicional del software Para obtener más información acerca de las operaciones del software, consulte los Tutoriales de cada uno de los programas de software o la correspondiente Guía del usuario. PowerCinema NE for Everio Haga doble clic en el icono de PowerCinema NE for Everio.
Estructura de carpetas y extensiones Soporte de grabación [DCIM] [XXXJVCSO] [XXXJVCSO] [XXXJVCSO] [SD_VIDEO] [MGR_INFO] [PRGXXX] [PRGXXX.PGI] [MOVXXX.MOD] [MOVXXX.MOI] [PRGXXX] [PRGXXX] [EXTMOV] [MOV_XXX.MOD] [DEM_XXX.MPG] [MISC] [PRIVATE] * Información como la fecha y la hora de grabación, grabada con el archivo de vídeo. Extensiones Archivos de vídeo Archivos de imagen fi...
Copia de seguridad de archivos en un Macintosh Puede hacer una copia de seguridad de los archivos de la cámara en el equipo. Requisitos del sistema Hardware: Macintosh debe llevar incorporado de serie un conector USB 2.0 Sistema operativo: Mac OS X (v10.3.9, v10.4.2 a v10.4.10) Conexión de la cámara al Macintosh Preparativos: Cierre la pantalla LCD para apagar la cámara.
Copia de seguridad de archivos en un Macintosh Preparativos: Conecte la cámara al equipo con el cable USB. ( p. 30) En el equipo, cree una carpeta para almacenar los archivos de seguridad. Abra la pantalla LCD para encender la cámara. En la cámara, seleccione [REPRODUCIR EN PC].
El uso de este software está autorizado según los términos estipulados en la licencia del software. Cuando se ponga en contacto con la ofi cina o agencia de JVC más cercana de su país (consulte la red de servicio internacional de JVC en http://www.jvc-victor.co.jp/english/worldmap/ index-e.html) en relación con este software, tenga a mano la siguiente información.
Si no se resuelve el problema, reinicie la cámara. ( • Si el problema persiste, consulte con su distribuidor JVC más próximo. Para reiniciar la cámara 1) Cierre la pantalla LCD para apagar la cámara y quite la fuente de alimentación (batería o adaptador de CA) de la...
Solución de problemas Problema El enfoque no se ajusta automáticamente. La velocidad de toma continua es lenta. La reproducción no puede realizarse. Durante la reproducción de vídeo, el indicador parpadea. Los archivos no se pueden eliminar. El procesamiento de datos es demasiado lento después de encender la cámara o de cambiar de modo.
Indicaciones de advertencia Indicación (Indicador de batería) ¡AJUSTE FECHA/HORA! COMPRUEBE LA CUBIERTA DEL OBJETIVO ¡ERROR EN HDD! ¡ERROR EN TARJETA DE MEMORIA! ARCHIVO GESTIÓN VÍDEO DAÑADO SE DEBE RECUPERAR PARA GRABAR/REPRODUCIR VÍDEO ¿RECUPERAR? ERROR DE GRABACIÓN DESCONECTADO O DISPOSITIVO USB NO COMPATIBLE EL SENSOR DE GRAVEDAD SE HA ACTIVADO Y SE HA...
Especifi caciones Cámara Aspectos generales Fuente de alimentación eléctrica CC 11 V (con adaptador de CA) CC 7,2 V (con batería) Consumo eléctrico Aproximadamente 2,7 W* * Cuando la luz de fondo de la pantalla está ajustada en modo de [ESTÁNDAR]. Dimensiones (anchura x altura x fondo) 113 mm x 68 mm x 54 mm Peso...
Page 77
Tiempo de grabación aproximado (minutos) (para vídeo) Soporte de grabación Calidad ULTRAFINA FINA NORMAL ECONÓMICA Número aproximado de imágenes almacenables (para imágenes fi jas) Soporte de grabación Tamaño de imagen/Calidad 640 x 480 / FINA 640 x 480 / ESTÁNDAR Tiempo de carga/grabación necesario (aprox.) * Cuando la luz de fondo de la pantalla está...
CA que no sea de la serie American National Standard C73, emplee un enchufe adaptador de CA, denominado “Siemens Plug”, como el mostrado. Consulte con su distribuidor JVC más cercano para obtener este enchufe adaptador. Baterías La batería suministrada es una batería de iones...
Page 79
Los cambios o modifi caciones no aprobados por JVC podrian anular la autoridad del usuario para utilizar el equipo. Este equipo ha sido examinado y cumple con los límites de dispositivos digitales Clase B, segun el Apartado 15 de la reglamentacion FCC.
Términos Adaptador de CA ... 14, 38 Ajuste del reloj ... 14 Batería ... 14, 15, 38 Copia (traslado) de archivos de imagen fi ja ... 23, 30 Copia de archivos de vídeo ... 23, 30 Disco duro ... 38 Eliminación de archivos ...