JVC LST0904-001B Instruction Manual page 129

Symptom
The date and time are not displayed.
No output from the [Y/VIDEO], [PB], and
[PR] video signal output terminals.
Incorrect display on the viewfinder.
IEEE1394 connection between the camera
recorder and the external device cannot
be established (e.g., no image on the
camera recorder and/or external device).
● The date and time are only displayed on the STATUS 2 and STATUS 3
Screens in the Camera mode (during shooting). (A Page 98) (A Page 99)
● Is [Output Terminal] in the [A/V Out] menu correctly set? (A Page 86)
● Is the LCD used with [LCD + VF] in the [LCD/VF] menu set to Off ?
(A Page 82)
● Is the operation mode correctly set? (A Page 7)
● Is the [INT/EXT] IEEE1394 interface terminal switch correctly set?
● Is the [HD/DV] IEEE1394 terminal mode switch correctly set?
● Check the connection, such as by removing the IEEE1394 cable and inserting
it again, or by reconnecting the power.
Action