Pan To Stereo Busses; Balance - Yamaha M7CL StageMix V3.0 User Manual

Yamaha Commercial Audio
5.4

PAN TO STEREO BUSSES

When PAN mode is selected using the buttons described in section 5.0, all 8
thumbnail images will display a slider showing the position of the Pan to the
Stereo Busses for each channel.
above each slider.
Double-tap on the slider to set the Pan position to Center.
Text shows whether each channel is assigned to the ST, Mono or the LCR
busses.
 ST is displayed in red if the channel is assigned to the Stereo bus.
 M is displayed in yellow if the channel is assigned to the Mono bus.
 LCR is displayed in white if the channel is assigned to LCR.
These text indicators are display-only and these assignments cannot be edited
from StageMix.

5.4.1 Balance

"BAL" will be displayed below the pan slider for Stereo Input channels.
The pan slider is used to adjust the Balance.
Mix and Matrix Busses provide a Balance control when they are
configured as stereo pairs. "BAL" will be displayed below the pan slider
when a Mix or Matrix Bus is configured as a stereo pair.
M7CL StageMix V3.0 User Guide
A numeric Pan position value appears
Page 23