Sends On Faders - Yamaha M7CL StageMix V3.0 User Manual

Yamaha Commercial Audio
The Phase setting for each input channel appears near the top of the
channel strips when HA GAIN mode is active. The Phase setting can
be edited from StageMix by pressing this button. The button will have a
grey background when the Phase setting is normal and will change to
an orange background when Phase is reversed.
4.8

SENDS ON FADERS

Press the [SENDS ON FADERS] button in the left column of the Mixer screen
to access sends to Mix Busses. In "SENDS ON FADERS" mode, each fader
controls the send level from its channel to the currently selected Mix. The
fader level indicators in the "Navigation/Meter Bridge" will show the positions
of all the Mix Send Levels if the appropriate Preference is On in the Setup
screen (refer to 8.6).
The large [MIX ON FADERS] button displays the currently selected Mix Bus
number and its name. The color of this button matches those used in the
M7CL console.
[CUE] and [ON] buttons appear below the [SENDS ON FADERS] button,
allowing the currently active Mix Bus to be Cued and turned On/Off.
There are two ways to select a target Mix Bus:
a) Use a swipe gesture on the [MIX ON FADERS] button to
increment/decrement through the Mix and Matrix Busses.
M7CL StageMix V3.0 User Guide
Page 13