Connection Lost; Graphic Eq Doesn't Affect The Sound; Problems Moving Multiple Faders - Yamaha M7CL StageMix V3.0 User Manual

Yamaha Commercial Audio
9.3

Connection Lost

If StageMix loses its connection to the console, the following message will
appear. Operation of StageMix is not possible while this message box is
onscreen. StageMix will automatically attempt to reconnect to the console. If
this is successful, StageMix will re-synchronize with the console data and
operation will become available again.
9.4

Graphic EQ Doesn't Affect the Sound

If a Graphic EQ is assigned to an input channel or Mix/Matrix bus but it doesn't
seem to be affecting the sound on that channel, it could be that the Insert for
that channel has been switched Off. Check the state of the Insert ON switch
in the console.
9.5

Problems Moving Multiple Faders

・If Multitasking Gestures (in iOS 4.3 or higher) is ON, it may not be possible
to move more than three faders simultaneously in StageMix. When using
StageMix, it is recommended that Multitasking Gestures be turned OFF.
a. Open the iPad "General" menu.
b. Set the button for "Multitasking Gestures" to OFF.
・If the "Zoom" function in the "Accessibility" menu is ON, it may not be
possible to move more than two faders simultaneously in StageMix. When
using StageMix, it is recommended that "Zoom" be turned OFF.
M7CL StageMix V3.0 User Guide
Page 33