Stereo Out - Yamaha DM1000 Version 2 Manual

❏ Stereo Out
A
E F
A
CHANNEL SELECT section
Channels can be selected by clicking the Channel ID and choosing from the list that appears, or by
clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-
nel ID. The [LIBRARY] button opens the Channel Library window.
B
EQUALIZER section
This section contains the EQ controls and display graph for the Stereo Out. It's layout is identical to
the EQUALIZER section for Input Channels.
mation.
C
DELAY section
This section contains the delay controls for the Stereo Out. The rotary control is used to set the delay
time, and the [ON] button turns the Delay function on and off.
D
Balance & level section
This section contains the balance control, [AUTO] and [ON], and channel fader for the Stereo Out.
The meter to the right of the fader indicates the signal level, and the value indicator under the fader
indicates the fader position in decibels (dB).
E
INSERT section
This section contains the Insert parameters for the Stereo Out. The [ON] button turns the Insert on
and off. The OUT and IN parameters are used to specify the insert out destination and insert in source
respectively. The POSITION parameter is used to specify the position of the Insert in the signal path.
F
COMPRESSOR section
This section contains the Compressor controls and display graph for the currently selected Stereo Out.
Its layout is identical to the COMPRESSOR section for Input Channels except there is no [LINK] but-
ton. See "COMPRESSOR section" on page 13 for more information.
G
FADER GROUP & MUTE GROUP section
This section contains the Fader and Mute group functions for the Stereo Out. Use the FADER GROUP
buttons to add the Stereo Out to Fader groups, and use the MUTE GROUP buttons to add it to Mute
groups.
B C D
G
See "EQUALIZER section" on page 13 for more infor-
DM1000 Editor—Owner's Manual
16