Operating Instructions - Steel City 50000 User Manual

!
Danger!
Before adjusting the power tool, always press
the main switch Off/O.
Before switching on the power tool
Unpack the metal band saw and check that no
parts are missing or damaged.
Compare the mains voltage with the
specifications on the rating plate.
Assembling the metal band saw:
1. Place dovetail guide (A) in the uppermost
position.
2. Insert saw into the dovetail guide.
3. Tighten wing nut (B) to secure the saw.
4. Fold saw down. SEE FIG.1
Fig.1
A

OPERATING INSTRUCTIONS

B
Transport and installation
1. Lift the machine onto the machine table
(C). SEE FIG.2
Fig.2
D
F
E
2. Insert looking pin (E) into the opening on
the swivel support (F) and raise the
Power Tool on the saw frame (D).
!
Caution!
When selecting the installation location,
ensure that the installation surface is
adequately stable and that there is sufficient
light.
Note: The ergonomically optimum working
height is 35"-37"
11
C