Firmware Version Information Mode - Kenwood TK-3170 Service Manual

No. Function
33 First Digit Time
∗ and # Digit
34
35 Dial ID
36 D Code Assignment
37 DTMF Signaling
38 Inter Mediate Code
39 Group Code
40 Auto Reset Timer
41 Alert Tone (Individual)
42 Alert Tone (Group)
43 Transpond
Others
44 Panel Test/
Panel Tuning Mode
Refer to the function setting mode flow chart on page 20.
8-5. Memory Reset Mode
• This mode is used to clear data for functions that can be
set in Self-Programming Mode or to return to reset values
(default).
• Pressing [S] key when "SELF" is shown, sets the display
to "CANCEL".
• Turning the selector alternately switches the display be-
tween "CANCEL" ↔ "READY".
• Pressing [B] key when "READY" is shown, clears the data
and sets the display to "CLEAR".
• Pressing [S] key again, returns the display to "SELF".
• Pressing [S] key when "CANCEL" is shown, returns the
display to "SELF" without resetting the data.
REALIGNMENT
Choices
0, 100, 500, 1000
0, 100, 500, 1000
ON/OFF
D Code
1~16/1s
OFF
Code SQ
SelCall
0~9, A~D, ∗, #
Off, A~D, ∗, #
Off, 1~300/1s
Off, 1~8/ 1
Off, 1~8/ 1
Off
Alert
ID Code
Transpond Code
Ringing Tone
Enable
Disable
TK-3170/3173
Display
F D T _ _ _ _ 0 Default=0
∗ # _ _ _ _ _ 0
Default=0
D I D _ O F F _ Default=OFF, Key=16key only
D C A _ D _ C D Default=D Code
D C A _ 1 6 _ _
D T M S _ O F F
←Default
D T M S _ C S Q
D T M S _ S E L
I MC _ _ _ _ # DTMF Signaling=SelCall, Default=#
G P C D _ O F F Default=Off
A R T _ _ 1 0 _ Default=10
C A T I _ _ _ 1 Default=1
C A T G _ _ _ 2 Default=2
←Default
T R P _ _ O F F
T R P _ _ A L T
T R P _ _ I D C
T R P _ _ T R C
T R P _ _ R I N
P T M _ E N A _
←Default
P T M _ D I S _

9. Firmware Version Information Mode

Turn the transceiver ON with the [Side1] key held down.
Then, the version is displayed during holding the [Side1] key.
Remarks
19