Installation; Pre-Installation Instructions; Installation Procedure - Mitsubishi Electric FR-A5AX Instruction Manual

2.INSTALLATION

2.1 Pre-Installation Instructions

Make sure that the input power of the inverter is off.
With input power on, do not install or remove the option unit. Otherwise, the inverter and
option unit may be damaged.

2.2 Installation Procedure

(1) Securely insert the connector of the option unit far into the connector of the inverter. At this time, fit the
option fixing holes snugly. For the position of slot, refer to the next page.
Also be sure to fit the unit into the option fixing hook (For the FR-A500(L)/ FR-F500(L) series, it is avail-
able in Aug., 2000).
(2) Securely fix the option unit to the inverter on both sides with the accessory mounting screws. If the
screw holes do not match, the connector may not have been plugged snugly. Check for loose plugging.
CAUTION
3