Maintenance; Maintenance Aids - Mercury Bravo Three Operation & Maintenance Manual

Mercury marine bravo iii boat operation & maintenance manual
Table of Contents

Advertisement

CA290

Maintenance

Always disconnect battery cables from battery before working
around electrical system components to prevent injury to your-
self or damage to electrical system.
IMPORTANT: Refer to MAINTENANCE CHART for complete
listing of all scheduled maintenance to be performed. Some list-
ings can be done by owner/operator, while others should be
performed by an Authorized MerCruiser Dealer. Before attempt-
ing maintenance or repair procedures not covered in this manu-
al, it is recommended that a MerCruiser Service Manual(s) be
purchased and read thoroughly.
NOTE: Maintenance points are color coded for ease of identifica-
tion. See the decal on engine for identification.

Maintenance Aids

1
Power Steering System - Quicksilver Power Trim and Steering
Fluid or Dexron III automatic transmission fluid (ATF).
2
All Pivot Points - SAE 30W motor oil.
3
Fogging (Winterizing) Engine - Quicksilver Storage Seal or SAE
20W motor oil.
4
Exposed portion of Steering Cable and Propeller Shaft - Quicksil-
ver Special Lubricant 101.
5
Stern Drive Unit - Quicksilver High Performance Gear Lube.
6
Gimbal Bearing - Quicksilver U-Joint and Gimbal Bearing Grease.
7
All Exterior Surfaces - Quicksilver Primer and Spray Paint and
Quicksilver Corrosion Guard.
8
Power Trim System - Quicksilver Power Trim and Steering Fluid,
or SAE 10W-30 motor oil.
(Continued on next page)
!
WARNING
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7.4l bravo three

Table of Contents