Power Trim Does Not Operate
(Motor Doesn't Run)
Possible Cause
Blown fuse.
Loose or dirty electrical
connections or damaged
wiring.
Power Trim Does Not Operate (Motor Runs But
Drive Unit Does Not Move)
Possible Cause
Trim pump oil level low.
Drive unit binding in
gimbal ring.
Remedy
Replace fuse.
Check all associated elec-
trical
connections
and
wires (especially battery
cables). Clean and tighten
faulty connection. Repair
or replace wiring.
Remedy
Fill pump with oil.
Check for obstruction.
109