Audio Function Section - Panasonic AJ-SDX900E Operating Instructions Manual

CONTENTS
Chapter 2 Parts and their functions
2-2 Audio function section (input system)
MIC IN (microphone input) jack (XLR, 3-pin)
1
Connect the microphone (optional accessory) here. The
power for the microphone is supplied from this jack.
A stereo microphone can also be used by installing a
stereo microphone jack (XLR, 5-pin; optional accessory)
here.
2
AUDIO LEVEL CH1/CH2 (audio channel 1 & 2
recording level adjustment) controls
When the AUDIO SELECT CH1/CH2 switch 3 is set to
MAN, the recording level of audio channels 1 and 2 can be
adjusted using these controls.
These controls come with a locking mechanism: when they
are to be adjusted, push them in at the top part to release
the mechanism.
3 AUDIO SELECT CH1/CH2 (audio channel 1 &
2 automatic/manual
selector) switch
This is used to select the method for adjusting the
recording levels of audio channels 1 and 2.
AUTO: Set here for automatic adjustment.
MAN: Set here for manual adjustment.
AUDIO IN (audio input selector) switch
4
These are used to select the input signals to be recorded
on audio channels 1, 2, 3 and 4.
FRONT: The input signals supplied from the
microphone which has been connected
to the MIC IN jack 1 are recorded.
W.L. (wireless): The input signals from the slot-in
wireless
recorded.
REAR: The audio input signals supplied from
the audio component which has been
connected to the AUDIO IN CH1/CH2
connectors 5 are recorded.
10
1
level adjustment
microphone receiver are
= <
?
8
5 AUDIO IN CH1/CH2 (audio input channel 1 &
2) connectors (XLR, 3-pin)
An audio component or microphones are connected here.
6 LINE/MIC/+48V (line input/mic input/mic
input + 48V) selector switch
This is used to switch the audio input signals from the
audio component which has been connected to the AUDIO
IN CH1/CH2 connectors 5.
LINE: The audio input signals from the audio component
serving as the line input are selected.
MIC: The audio input signals from the internal power
supply type of microphone are selected. (The
phantom mic power is not supplied from the unit.)
+48V: The audio input signals from the external power
supply type of microphone are selected.
phantom mic power is supplied from the unit.)
7 Wireless receiver slot
The UniSlot® wireless receiver (optional accessory) can
be attached here.
8
FRONT AUDIO LEVEL (audio recording level
adjustment) control
This enables the recording level of audio channels 1 and 2
to be adjusted. This level can be adjusted regardless of
the setting position of the AUDIO SELECT switch.
When the <MIC/AUDIO1> screen is opened from the VTR
MENU page by performing a menu operation, whether to
enable or disable the operation of this level control can be
set using the FRONT VR CH1 and FRONT VR CH2
setting items.
> ; : 3 7
2
6
@ 5 9
4
(The