Vf Marker - Panasonic AJ-SDX900E Operating Instructions Manual

CONTENTS
Chapter 7 Menu description tables
7-4-2

VF MARKER

Variable
Item
range
TABLE A For selecting the VF MARKER setting table.
B This item is used to set the current values of
table A or B which have been selected using
the menu items listed below.
CENTER MARK OFF For selecting the centre marker.
1 OFF: The centre marker is not displayed.
2 1:
3 2:
4 3:
4:
SAFETY ZONE OFF For selecting the type of safety zone frame.
1 OFF: The safety zone frame is not displayed.
2 1:
2:
SAFETY AREA 80% For setting the position of the safety zone.
:
90%
:
100%
FRAME SIG 4:3 For setting the frame marker.
13:9 Note that this setting takes effect only when
14:9 REC MODE is set to 16:9.
VISTA The VISTA setting is 16:8.65.
FRAME MARK ON For selecting ON or OFF for the frame
OFF marker.
FRAME LVL 00 For setting the level of the frame marker.
:
0: Equivalent to signal OFF
15
15: Same brightness as centre area
However, this setting has no effect if
FRAME SIG is set to VISTA.
7-4-3 USER BOX
Variable
Item
range
USER BOX ON For setting whether or not to display the user
OFF box.
USER BOX WIDTH 001 For setting the horizontal width of the user
:
box.
013
:
100
USER BOX 001 For setting the vertical height of the user box.
:
HEIGHT
013
:
144
USER BOX H POS –50 For setting the horizontal position of the user
:
box centre.
+00
:
+50
USER BOX V POS –144 For setting the vertical position of the user box
:
centre.
+000
:
+144
The underlining in the variable range column indicates the setting in the preset mode. The underlining in the variable range column indicates the setting in the preset mode.
86
Remarks
+ (large)
Centre blank (large)
+ (small)
Centre blank (small)
Box
Corner frames
Remarks
7-4-4 VF INDICATOR1
Variable
Item
range
EXTENDER ON For selecting ON or OFF for the extender
OFF display.
SHUTTER ON For selecting ON or OFF for the shutter speed
OFF display.
FILTER ON For selecting ON or OFF for the filter No.
OFF display.
WHITE ON For selecting ON or OFF for the AWB
OFF PRE/A/B display.
GAIN ON For selecting ON or OFF for the currently
OFF selected gain, S.GAIN and DS.GAIN display.
IRIS OFF OFF:
IRIS
S+IRIS IRIS:
S S+IRIS: Both the super iris ON status and
S:
(The display or non-display of the aperture
value and that of the iris override are linked.)
CAMERA ID BAR For setting the ID configuration during
CAM recording.
ALWAYS BAR:
OFF
CAM:
ALWAYS: The ID is recorded at all times.
OFF:
ID POSITION UPPER R For setting the location where the camera ID
UPPER L is to be recorded.
LOWER R UPPER R: Top right
LOWER L UPPER L: Top left
LOWER R: Bottom right
LOWER L: Bottom left
DATE/TIME ON For specifying whether or not the date and
OFF time are mixed simultaneously when the
CAMERA ID is recorded.
ZOOM LVL ON For selecting ON or OFF for the zoom
OFF position display.
COLOR TEMP ON For selecting ON or OFF for the color
OFF temperature display.
CAMERA MODE ON For selecting ON or OFF for the camera's
OFF operation mode display.
Remarks
Neither the super iris ON status nor
the aperture value is displayed.
Only the aperture value is displayed.
aperture value are displayed.
The super iris ON status is displayed.
The ID is recorded when color bar
signals are provided.
The ID is recorded when the camera
images are provided.
The ID is not recorded at any time.