Bp-L60/90; For Enabling Or Disabling The Selection Made; For The Battery Select Item; The Selection Is Enabled - Panasonic AJ-SDX900E Operating Instructions Manual

CONTENTS
Chapter 7 Menu description tables
7-8-2 BATTERY/TAPE
Variable
Item
range
BATTERY SELECT AJ-BP490 For selecting the type of battery to be used.
AU-BP402 The
HP-30A accordance with the battery which has been
PRO14 selected.
TRIM14 The variable range is changed by the item
HYTRON50 settings selected on the "7-8-3 BATTERY
HYTRON100 SETTING1"
DIGITAL14 SETTING2" menus.
DIGITAL13 Note that the initial value for TYPE A
DIONIC corresponds to the PROFORMER and for
BP-H120 initial value for TYPE B to the HYTRON100,
NP-L50 both of which are manufactured by Anton
NP-L50D Bauer.
ENDURA50
ENDURA80

BP-L60/90

NP-1B

TYPE A
TYPE B
EXT DC IN AC_ADPT The variable range is changed by the item
SELECT AJ-BP490 settings selected on the "7-8-3 BATTERY
AU-BP402 SETTING1"
HP-30A SETTING2" menus.
PRO14
TRIM14
HYTRON50
HYTRON100
BP-H120
NP-L50
ENDURA50
ENDURA80
BP-L60/90
NP-1B
TYPE A
TYPE B
BATT NEAR END ON For setting whether or not to output the
ALARM OFF warning tone when the battery charge is
nearly depleted.
BATT NEAR END ON When this item is set to ON, the warning tone
CANCEL OFF and the warning display which are being
output can be canceled by pressing the
MODE switch when the battery charge is
nearly depleted.
BATT END ALARM ON For setting whether or not to output the warning
OFF tone when the battery charge is depleted.
BATT REMAIN 100% For setting when the remaining charge display
FULL 70% bar on the LCD is to be displayed when a
digital battery is used.
70%: A full charge is indicated with a 70% display
100%:A full charge is indicated with a 100% display.
TAPE NEAR END ON For setting whether or not to output the warning
ALARM OFF tone when the tape is nearly at its end.
TAPE NEAR END 3min For setting the remaining tape time at which
TIME 2min to sound the warning that the tape has only
the designated amount of time (2min. or
3min.) remaining.
TAPE END ALARM ON For setting whether or not to output the
OFF warning tone when the tape reaches the end.
TAPE REMAIN/∫ 5min/∫ For setting the time of each segment (∫) that
3min/∫ makes up the remaining time display bar on
the LCD.
5min: Each segment denotes a remaining
3min: Each segment denotes a remaining
94
Remarks
remaining charge is detected
and "7-8-4 BATTERY
and "7-8-4 BATTERY
time of 5 minutes.
time of 3 minutes.
7-8-3

BATTERY SETTING1

Variable
Item
range
AJ-BP490*
¢
in /
AUTO
MANUAL
11.0
:
11.5
:
15.0
AU-BP402
¢
/
AUTO
MANUAL
11.0
:
11.5
:
15.0
HP-30A
¢
/
AUTO
MANUAL
11.0
:
12.0
:
15.0
PRO14
¢
/
AUTO
MANUAL
11.0
:
13.8
:
15.0
* Select this item for the HP-90 or HP-90A manufactured by PACO.
Remarks

For enabling or disabling the selection made

for the BATTERY SELECT item.

¢: The selection is enabled.

/: The selection is disabled.

For selecting how the voltage at which the
battery charge is considered nearly depleted

is to be set.

AUTO: The voltage is set automatically.

MANUAL: The voltage is set manually.

For selecting, when MANUAL has been

selected as the setting for the menu item above,

in 0.1 V steps the voltage at which the battery
charge is to be considered nearly depleted.
For enabling or disabling the selection made
for the BATTERY SELECT item.
¢: The selection is enabled.
/: The selection is disabled.
For selecting how the voltage at which the
battery charge is considered nearly depleted
is to be set.
AUTO: The voltage is set automatically.
MANUAL: The voltage is set manually.
For selecting, when MANUAL has been
selected as the setting for the menu item above,
in 0.1 V steps the voltage at which the battery
charge is to be considered nearly depleted.
For enabling or disabling the selection made
for the BATTERY SELECT item.
¢: The selection is enabled.
/: The selection is disabled.
For selecting how the voltage at which the
battery charge is considered nearly depleted
is to be set.
AUTO: The voltage is set automatically.
MANUAL: The voltage is set manually.
For selecting, when MANUAL has been
selected as the setting for the menu item above,
in 0.1 V steps the voltage at which the battery
charge is to be considered nearly depleted.
For enabling or disabling the selection made
for the BATTERY SELECT item.
¢: The selection is enabled.
/: The selection is disabled.
For selecting how the voltage at which the
battery charge is considered nearly depleted
is to be set.
AUTO: The voltage is set automatically.
MANUAL: The voltage is set manually.
For selecting, when MANUAL has been
selected as the setting for the menu item above,
in 0.1 V steps the voltage at which the battery
charge is to be considered nearly depleted.