EcoQuest Fresh Air Owner's Manual

EcoQuest Fresh Air Owner's Manual

Installation, operation, specifications, features, maintenance, warranty
Hide thumbs Also See for Fresh Air:

Advertisement

OWNERS MANUAL
Installation
Operation
Specifications
Features
Maintenance
Warranty
65-00087-004 REV 02_04
FA SP-ENG OM - 02_04

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Fresh Air and is the answer not in the manual?

Questions and answers

rocco russo
May 2, 2025

how long do i keep it on for

1 comments:
Mr. Anderson
May 17, 2025

The EcoQuest Fresh Air unit can be turned on and off as needed using the remote or control panel. There is no specific time limit for how long it should be kept on, but the sanitizer function can be set for up to eight hours at a time.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for EcoQuest Fresh Air

  • Page 1 OWNERS MANUAL Installation Operation Specifications Features Maintenance Warranty 65-00087-004 REV 02_04 FA SP-ENG OM - 02_04...
  • Page 2: Table Of Contents

    Be sure to read and follow all service Your New Fresh Air by EcoQuest: ......4 procedures outlined in this owner’s manual and to use only...
  • Page 3: Inspection & Installation

    INSPECTION & INSTALLATION OPERATION 1. Remove protective packaging. 1. Adjust the fan speed to your preference keeping in mind that higher fan speeds will give better results. 2. Remove unit from shipping carton. 2. Set the purifier controls anywhere from zero up to the total 3.
  • Page 4: Specifications

    YOUR NEW FRESH AIR BY ECOQUEST: Electrical: • 100 volt 50/60hz, 110 volt 60 hz, 220/240 volt 50/60 hz • Eliminates smoke, odors, and tobacco smoke. depending on model • Sanitize feature kills mold, mildew, and bacteria. • 90 watts power consumption •...
  • Page 5: Unit Features

    UNIT FEATURES Back of Unit / Rear Access Removable Grill Main Power Switch Fuse Controls Power Cord Receptacle Infrared Window LCD Display • Five Speed Fan • IntelliAir™ Service Alerts • Washable Ecotech Purification Plate • Adjustable Purifier control • Remote Control or Manual Operation •...
  • Page 6: Settings And Adjustments

    SETTINGS AND ADJUSTMENTS Fresh Air by EcoQuest can be turned on or off and adjusted using POWER either the included remote or the control panel on the front of the Turns the unit ON and OFF. Works only when the Main unit.
  • Page 7: Maintenance And Service Reminders

    • Replace the UV lamp and starter (new lamps and starters are button and the screen will display CLEARED, then clear the message). available from your EcoQuest Dealer) All the other service reminders will clear automatically once the unit has been turned off and back on and the problem has been corrected.
  • Page 8: General Maintenance

    GENERAL MAINTENANCE Periodic maintenance is required to insure that your Fresh Air by 2. When visibly dirty, remove the rear lint screen and catalytic EcoQuest operates properly. The unit will display a PERFORM screen from the unit (see pages 10 - 13) and wash in hot water, MAINTENANCE reminder when it is time to perform regular brushing gently with a toothbrush to remove particulate.
  • Page 9: Placement Of Unit

    OPTIONAL ECOHELP FILTER Note: For removal of additional dust and allergens, your Fresh Air by • The rear of the unit should always have at least one inch of EcoQuest will accommodate an optional EcoHelp filter. The open area to allow unrestricted airflow.
  • Page 10: Removing The Lint Screen

    6. 3. Remove back cover. For installation of the lint screen or EcoHelp filter, go to page 13. WARNING: DO NOT OPERATE Fresh Air by EcoQuest without the lint screen and back cover properly installed.
  • Page 11: Removing The Purifier Plate & Catalytic Screen

    Household Cleaner will clean your purification plates without the fumes or smell of ammonia. Ask your 11. Rotate UV Bulb 1/4 turn, 10. Rotate starter and lift EcoQuest Dealer for more information. lift out of holders, and to remove. remove from unit.
  • Page 12: Installing The Uv Lamp

    INSTALLING THE UV LAMP INSTALLING CATALYTIC SCREEN & PURIFIER PLATE 5. Replace catalytic screen by gently inserting into the large guides until the screen stops. To Install: Lint Screen or Catalytic Screen 1. Insert UV bulb into holder EcoHelp Filter follow steps 5 - 11 then rotate to lock into place.
  • Page 13: Installing The Lint Screen

    When installing the purification plate, be sure the metal tabs are making contact with WARNING: DO NOT OPERATE Fresh Air by EcoQuest without the lint the screen on each screen and back cover properly installed. side of the plate.
  • Page 14: Troubleshooting

    "Maintenance" section 1. I have plugged in the unit, turned “on” the main power switch, of this Owner's Manual. Order new plates from your EcoQuest pressed the ON button on the remote (or the unit) and nothing Dealer.
  • Page 15 If your unit fails to operate properly after performing trouble-shooting, Problem: Lack of ionization and / or air movement. contact your EcoQuest Dealer for further assistance, contact EcoQuest at the address located on the front of the manual, or visit...
  • Page 16: Warranty Information

    Did you forget to register your Fresh Air by EcoQuest? WARRANTY INFORMATION By registering, you’ll activate your warranty, and your privacy is guaranteed. This product is of solid state construction and is Just fill out your warranty card and drop it in the mail.

Table of Contents

Save PDF