Related Manuals for EcoQuest Fresh Air To Go
Summary of Contents for EcoQuest Fresh Air To Go
- Page 1 62-000110-001 FATG OM 0604 Anywhere. Anywhere. Everywhere. Everywhere. Fresh Air... Fresh Air... To Go. To Go.
-
Page 2: Table Of Contents
Contents Specifications Specifications ..........2 •... -
Page 3: Operation
4. Snap the unit and wire stand into the base. affect performance and holding ability. 5. The Fresh Air To Go unit will come on when either of the FAN buttons on the control pad are pressed. 6. Adjust the fan speed by pressing the FAN UP and FAN DOWN buttons. -
Page 4: Adjusting The Wire Stand
Adjusting the Wire Stand Wire Stand Positions The wire stand on the Fresh Air To Go allows for quick release from the base, provides a stand or hanger for the unit independent of the base, and allows the unit to either stand or hang from the base depending •... -
Page 5: Power Adapters
Power Adapters Portability Fresh Air To Go comes with both a 12 volt DC car adapter and a Depending on how it is mounted, your Fresh Air To Go can be 100 - 240 volt 50/60 Hz AC adapter with interchangeable plugs. -
Page 6: Dissassembly
Disassembly All user maintainable parts of the Fresh Air To Go are accessed by removing the lower half of the case. The 1. Turn unit over and remove screw 2. Tilt the front of the lower half of 3. With the front tilted up, slide the lower unit must be disconnected at the front of the unit. -
Page 7: Cleaning
Case Lack of air flow Clean the exterior case of your Fresh Air To Go with a soft cloth • Make sure the intake vents are not blocked and the front of the unit is clear. dampened (not wet) with water. Do not use harsh chemicals or •... - Page 8 See warranty card for specific details. • Connect the equipment into an outlet on a circuit different from that to which the receiver If you have any questions concerning your Fresh Air To Go, please is connected see your local EcoQuest Dealer.