Advertisement

OWNERS MANUAL
Installation
Operation
Specifications
Features
Maintenance
Warranty
65-00087-008 REV 0905
FAOM15_0905

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FreshAir and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EcoQuest FreshAir

  • Page 1 OWNERS MANUAL Installation Operation Specifications Features Maintenance Warranty 65-00087-008 REV 0905 FAOM15_0905...
  • Page 2: Inspection & Installation

    INSPECTION & INSTALLATION OPERATION 1. Remove protective packaging. 1. Adjust the fan speed to your preference keeping in mind that higher fan speeds will give better results. 2. Remove unit from shipping carton. 2. Set the purifier controls anywhere from zero up to the total area 3.
  • Page 3 Back of Unit / Rear Access Main Power Switch Fuse Power Cord Receptacle Infrared Window LCD Display • Five Speed Fan • Adjustable Purifier control • LCD Display • Sanitizer Function w/ adjustable digital timer • IntelliAir™ Maintenance Reminders...
  • Page 4: Lcd Display

    • Replace the old purifier plate with a new purifier plate (available As adjustments are being made, the LCD screen backlight will from your EcoQuest Dealer) brighten and the settings on the screen will change. After 3 seconds without change, the backlight will return to normal.
  • Page 5: General Maintenance

    2. When visibly dirty, remove the rear lint screen from the unit Changing the UV Lamp Place the unit as high by EcoQuest operates properly. The unit will display a PERFORM (see pages 10 - 13) and wash in hot water, brushing gently with as possible to insure...
  • Page 6 Purification Plates. Ask your EcoQuest Dealer for more information. (See page 8 for complete cleaning instructions.) WARNING: DO NOT OPERATE Fresh Air by EcoQuest 11. Rotate UV Bulb 1/4 turn, 10. Rotate starter and lift without the lint screen and back cover properly installed.
  • Page 7 WARNING: DO NOT OPERATE Fresh Air by EcoQuest without the lint the screen on each 3. Replace cage by lowering and screen and back cover properly installed. 4. Connect the two (2) lead wires side of the plate.
  • Page 8: Troubleshooting

    4. The UV lamp is not functioning / I’m getting a “Replace Lamp” message. shooting, contact your EcoQuest Dealer for further assistance, contact EcoQuest at the address located on the front of the manual, 6. How can I tell if the UV lamp is functioning? •...
  • Page 9: Warranty Information

    If you have any questions concerning your for help. Fresh Air by EcoQuest, please see your local EcoQuest Dealer. Signature:___________________________ For help, visit www.EcoQuest.com. Printed Name: R. Paul Beam Title: Engineering Manager Date: 7/9/04 COPYRIGHT © 2003 - 2004 ECOQUEST INTERNATIONAL. ALL RIGHTS RESERVED...

Table of Contents