Combination Recording; Continuous Recording With Motion / Alarm Recording - Nuvico EV-400 Instruction Manual

5.4 COMBINATION RECORDING

If a need arises to record a combination of continuous, motion, alarm and scheduled recording, then
the DVR can be configured so that all four features are used in conjunction with one another.
Please make sure that the Record Rate is set to ON (1F/S ~ 30F/S) from the RECORD Menu.

5.4.1 CONTINUOUS RECORDING with MOTION / ALARM RECORDING

For instances where a location needs to be recorded 24 hours a day seven days a week at a minimal
recording speed, but the requirement is to record at higher recording speed in case of a motion /
alarm triggers. Both motion and alarm recording can be used together to satisfy the needs.
The combination of both settings will meet the requirement of recording 24 hours a day and seven
days a week at 4 pictures per second for all channels until a motion / alarm trigger occurs. When a
motion / alarm triggers, then the DVR will record 15 / 30 pictures per second for the duration of
RECORD TIME, and then resume the continuous recording of 4 pictures per second.
Continuous recording settings have been configured to
4 pictures per second.
MOTION recording has been configured to record at 15
pictures per second, and ALARM recording has been
configured to record at 30 pictures per second.
Also, verify that the settings for motion grids, motion
sensitivity level, alarm buzzer, and record time have
been configured under the CAMERA / DEVICE SETUP
menu.
- 39 -