Table of Contents
Advertisement
Configuring Watch Settings
G-SHOCK+ can be used to easily
configure alarm, timer, and 12/24-hour
timekeeping settings.
1. Y Tap the "G-SHOCK+" icon.
2. X Hold down the (B) button for about
0.5 seconds.
This causes the watch and phone to
connect with each other, and the
watch to enter the Control Mode.
3. Y Tap "Watch settings".
4. Y Select the setting you want to
change and then perform the
operation shown on the phone
screen.
World Time City Setting
With World Time, you can select the
desired World Time City from one
displayed in the G-SHOCK+ city list or
world map.
1. Y Tap the "G-SHOCK+" icon.
2. X Hold down the (B) button for about
0.5 seconds.
This causes the watch and phone to
connect with each other, and the
watch to enter the Control Mode.
3. Y Tap "Watch settings".
4. Y Tap "World time".
5. Y Perform the operation shown on
the phone screen.
Operation Guide 5413
Note
G-SHOCK+ World Time lets
●
you select from among
approximately 300 cities as the
World Time City. If the city you
select with G-SHOCK+ is not
included in the 100 cities
supported by the watch, that
city's time zone will be
registered to [EXTRA] in the
watch's city list.
Adjusting Hand Alignment
You can use G-SHOCK+ to correct the
watch's hand positions when they do not
indicate the same time as the digital
display.
1. Y Tap the "G-SHOCK+" icon.
2. X Hold down the (B) button for about
0.5 seconds.
This causes the watch and phone to
connect with each other, and the
watch to enter the Control Mode.
3. Y Tap "Watch settings".
4. Y Tap "Basic settings".
5. Y Tap "Adjusting home positions".
6. Y Perform the operation shown on
the phone screen.
Connection
Cancelling a Connection with a
Phone
Connected
After disconnection
To terminate the Bluetooth connection,
hold down (B) for about 0.5 seconds until
the Bluetooth indicator disappears.
Connecting with a Phone
This section explains how to establish a
Bluetooth connection between a phone
that is paired with the watch.
If the watch is not paired with the phone
●
you want to connect with, perform the
procedure under
"C Pairing the watch
with a
phone" to pair them.
1. Move the phone close to (within one
meter of) the watch.
2. X If the Bluetooth indicator is not
displayed, hold down (B) for about
0.5 seconds to connect.
This will establish a Bluetooth
connection and cause the Bluetooth
indicator to appear.
The watch will enter the Control
●
Mode.
Not connected
Important!
If you have problems
●
establishing a connection, it
could mean that G-SHOCK+ is
not running on the phone. On
the phone's home screen, tap
the "G-SHOCK+" icon. Then on
the watch, hold down the (B)
button for about 0.5 seconds.
Connected
5
Advertisement
Table of Contents
