Download Print this page

Casio 3178 Operation Manual

Casio watch operation guide
Hide thumbs

Advertisement

MA0905-EA
About This Manual
General Guide
• Press C to change from mode to mode.
• In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Timekeeping Mode
Timekeeping
Day of week
Month – Day
Seconds
Hour : Minutes
PM indicator
To set the time and date
Home time zone
Seconds
Day
3. When the setting you want to change is flashing, use D and B to change it as
described below.
Screen
To do this:
Reset the seconds to
Toggle between Daylight Saving
Time (
ON
) and Standard Time (
Specify the UTC offset
Change the hour or minutes
Change the year
Change the month or day
• See "Daylight Saving Time (DST)" for details about DST setting.
• The UTC offset setting range is –12.0 to +14.0, in 0.5-hour units.
• When DST is turned on, the UTC offset setting range is –11.0 to +15.0, in
0.5-hour units.
4. Press A to exit the setting screen.
• The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard
Time. Remember that not all countries or even local areas use Daylight Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
DST indicator
Operation Guide 3178
• Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
• Button operations are indicated using the letters shown
in the illustration.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the "Reference" section.
Stopwatch Mode (ST1)
Stopwatch Mode (ST2)
Press
.
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select a Home Time zone before you set the time and
date.
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
DST
Home Time Zone
Month
Year
Minutes
Do this:
Press D.
00
Press D.
OFF
)
Use D (+) and B (–).
Use D (+) and B (–).
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to display the DST setting screen.
3. Press D to toggle between Daylight Saving Time
(
ON
displayed) and Standard Time (
OFF
4. Press A to exit the setting screen.
• The DST indicator appears on the display to indicate
that Daylight Saving Time is turned on.
Countdown Timer Mode
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-
hour timekeeping.
• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
• The P indicator is not displayed when the current time is displayed in other modes.
Stopwatches
Timekeeping Mode time
* During stopwatch elapsed
time measurement,
shows the number of
hours elapsed.
Hour
Minutes
Seconds
1/100 second
To measure times with the stopwatch
(Stopwatch Mode (ST1) and Stopwatch Mode (ST2))
Elapsed Time
Start
Split Time
Start
Two Finishes
Start
About Auto-Start (Stopwatch Mode (ST1))
With Auto-Start, the watch performs a 5-second countdown, and stopwatch operation
starts automatically when the countdown reaches zero.
During the final three seconds of the countdown, a beeper sounds with each second.
To use Auto-Start (ST1)
displayed).
Alarm Mode
Your watch has two stopwatch modes:Stopwatch Mode
(ST1) and Stopwatch Mode (ST2). Both stopwatch modes
let you measure elapsed time, split times, and two
finishes. The Stopwatch Mode (ST1) includes Auto-Start.
• A display range of the stopwatch is 999 hours,
59 minutes, 59.99 seconds.
• A stopwatch continues to run, restarting from zero after
it reaches its limit, until you stop it.
• A stopwatch measurement operation continues even if
you exit a Stopwatch Mode.
• Exiting a Stopwatch Mode while a split time is frozen on
the display clears the split time and returns to elapsed
time measurement.
• All of the operations in this section are performed in the
Stopwatch Mode (ST1) or Stopwatch Mode (ST2),
which you enter by pressing C.
Stop
Re-start
Stop
Split
Split release
Stop
(
displayed)
Split
Stop
Split release
First runner finishes.
Second runner
Display time of
Display time of first
finishes.
second runner.
runner.
1. While the stopwatch screen is showing all zeros in the
Stopwatch Mode, press A.
• This displays a 5-second countdown screen.
• To return to the all zeros screen, press A again.
2. Press D to start the countdown.
• When the countdown reaches zero, a tone sounds and
a stopwatch timing operation starts automatically.
• Pressing D while the Auto-Start countdown is in
progress starts the stopwatch immediately.
World Time Mode
Clear
Clear
Clear
1

Advertisement

loading

  Related Manuals for Casio 3178

  Summary of Contents for Casio 3178

  • Page 1 Two Finishes Start About Auto-Start (Stopwatch Mode (ST1)) With Auto-Start, the watch performs a 5-second countdown, and stopwatch operation starts automatically when the countdown reaches zero. During the final three seconds of the countdown, a beeper sounds with each second.
  • Page 2 • The watch emits a short beep for each of the last 10 seconds of the countdown. • If the countdown start time is six minutes or greater, the watch emits a short beep for each second of the final 10 seconds before the five-minute point is reached. Four short beeps are emitted to signal when the five-minute point is reached.
  • Page 3 Flash Alert Flash Alert indicator Button Operation Tone • Holding down C to turn the button operation tone on or off also causes the watch’s ) and 5 seconds ( current mode to change. • The mute indicator is displayed in all modes when the button operation tone is turned off.
  • Page 4 Operation Guide 3178 Auto light switch precautions • Avoid wearing the watch on the inside of your wrist. Doing so causes the auto light switch to operate when it is not needed, which shortens battery life. If you want to wear the watch on the inside of your wrist, turn off the auto light switch feature.

This manual is also suitable for:

Ma0905-ea