Table of Contents
Advertisement
Q9
The watch screen does
not display song titles
while in the Control
Mode.
Is the song name within the maximum
allowable characters?
The watch supports display of up
to 17 of the first alphanumeric
characters (letter, numbers,
symbols) of a song title. In the
case of Japanese characters
(hiragana or katakana), the watch
displays up to five of the first
characters as katakana. If you
want to view song titles in their
entirety, view them on the phone.
YES
Is the song name free of unsupported
characters?
[*CHECK App] appears when a
song title includes kanji or some
other character not supported for
display by the watch. If this
happens, view the title on the
phone.
YES
Other than the above.
The message [*FAILED] will
appear if the song title search
failed for some reason.
I can't exit the Control
Q10
Mode to another mode.
Press the CONNECT (B) button to
terminate the connection, and then press
the mode navigation (C) button.
You can also return to the Control Mode
from any other mode by holding down the
CONNECT (B) button for about 0.5
seconds.
Operation Guide 5413
Q11
The rotary switch is
disabled while in the
Control Mode.
To prevent operational error, the rotary
switch will not perform operation if it is
rotated only once. Error prevention re-
activates if no rotary switch operation is
performed for about three minutes.
Q12
How do I save a
SOUNDER Mode sound
to the phone?
Use the procedure below to import a
sound source prepared by you. The
imported sound source will be displayed
on the SOUNDER Mode sound source
editor screen.
iPhone Users
The procedure below uses iTunes file
sharing.
Requirement: iTunes 9.1 or higher
A Use a USB cable to connect your
phone to your computer.
B On your computer, start up iTunes.
C Under "DEVICES" on the iTunes
sidebar, select the phone name.
D Click the App tab and then scroll to
the bottom of the page.
E In the apps shown in the File Sharing
section, select "G'MIX" and then
drop the sound you want to import
into the Documents list on the right.
Note
For information about file
●
sharing, visit the Apple website.
Android Users
A Use a USB cable to connect your
phone to your computer.
B On your computer, select the
phone's external storage.
C Place the sound you want to input
into the "G'MIXApp" folder, which is
located in the "Music" folder.
World Time
The time for a World Time
Q1
City is not correct.
The summer time start date and time,
end date and time, or other rules were
changed by authorities.
Hand movement and digital
display
The time indicated by the
Q1
hands is different from
the digital time.
Strong magnetism or impact may cause
the hands of the watch to go out of
position. Use G-SHOCK+ to correct the
hand positions.
Adjusting Hand Alignment
l
Battery
Q1
[RECOV] is flashing on
the digital display.
This indicates that the watch's
RECOVER function has been triggered.
This function momentarily disables
watch functions to prevent rundown of
the battery.
Battery Replacement Period
l
[BATT] is flashing on the
Q2
digital display.
This indicates that battery power is
getting low.
Battery Replacement Period
l
Wrong input with the rotary
switch
Q1
The rotary switch
became operational
without you noticing it.
Accidental operation of the rotary switch
while the watch is being worn may result
in unintended operation.
Though the watch is designed to prevent
operation error, particular care is
required when assigning audio control
keys.
Using the Rotary Switch
l
18
Advertisement
Table of Contents
